Search results for query: *

Hi mookie, Try this link. The system manager manuals should help. http://support.avaya.com/css/Products/P0057/Administration%20&%20System%20Programming Steve

I need some help. Yesterday our Octel 350 unexpectedly restarted. I see in the status log when it rebooted, but I haven't been able to find the reason code. Any help would be appreciated. Status log posted below. *** System Restarted >>> INVESTIGATE SYSTEM ENVIRONMENT 00000 1CC09500 00000000...

Nevermind. I found that some of the Cortelco phones have a 24v-90v switch. This allows me to use the LED setting on the station form when this is set to 24v.

Thanks, I found a switch setting on *some* of the phones to use either 90v or 24v for MWI.

Help! We just migrated several users from an NEC IPX system to our Avaya switch. They had message waiting indicators on Cortelco analog phones that worked on the NEC but don't work on the Avaya. We're thinking that the phones may use either FSK signaling or neon, because it doesn't work on the...

Help! We just migrated several users from an NEC IPX system to our Avaya switch. They had message waiting indicators on Cortelco analog phones that worked on the NEC but don't work on the Avaya. We're thinking that the phones may use either FSK signaling or neon, because it is apparently not...

OzzieGeorge, Oh how I would prefer not to struggle! We are waiting to hear from the "powers that be" to see if we can change the operator access code as you suggested, but for political and other reasons, that may not be possible. So for the not so simple answer, can you direct me to the...

To the best of my knowledge, you will need a Call Accounting System or some other way to store the CDR (Call Detail Recording) output from the pbx.

I am asking this on behalf of an NEC administrator, so bear with me. Is the a way to have extensions starting with with 0 (ex: 01058) and an attendant/operator on an NEC2400 IPX system? With Avaya and other systems this is possible by using a feature called inter-digit timeout. Thanks.

Thank you, thank you, thank you!

Thanks KenMeans, I really appreciate your help! I had read over CN 4015 a couple of times. What I am wondering is this: 1)what card to use in the NEC, and 2)what the settings on the card would be. I work with Avaya switches mostly, but am starting to support a site that has an NEC 2400...

I am trying to figure out how to connect a NEC 2400 to an Octel 350 using T1 TIC's. What card do I need on the NEC side to connect to the TIC's? On the NEC, do I assign the T1 ports the station? Avaya's config notes are extremely vague.

I have a legacy IVR system that used to be connected to an Avaya switch using SMDI integration via a VoiceBridge unit. Now we want to connect it to an NEC 2400 IPX system, but I'm not sure how the NEC MCI integration works. I have found a VoiceBridge unit for NEC(model VB-205) online and am just...

Try changing the trunk group page 3 from Format: unk-pvt to public.

What type of equipment do you have on the NEC side? ie card(s), switch type, settings?

Thanks Simreal, Right now we are getting "OOS/FE-PINS-idle" state on the Avaya side using NI-2 protocol. Here's the Avaya DS1 settings. We've tried various interface settings of peer-master/slave & network/user. Bit Rate: 1.544 Line Coding: b8zs Line Compensation: 1...

Gr8ful, Can you post the settings on the NEC trunk form. I've been trying to get this setup but don't know the NEC switch. Thanks, JustMack

The way you described it is the same we way I have it. I get "invalid logon, mailbox number please". Sorry for the confusion. I'm used to Octel that would tell you the number "is not a recognized mailbox". Guess Mod Mess doesn't do that?

We are using MSS.

Thanks Ken. It is A MM 3.0 system we are testing. Is it a setting in the MAS somewhere? Documentation is severely lacking. Thanks for your help.