Search results for query: *

Please tell me which site is offering practice test for 642-902. I have used www.how2pass.com in the past for my CCNA, but 642-902 is yet to be available in the web site www.how2pass.com. If any of you have already taken the exam please let me know which website u have used to practice. Thanks...

Hello Friends, I have a question on configuring two bootprelays for two different DHCP servers that reside on two different VLANs for example: DHCP server 1 on VLAN X, DHCP server 2 on VLAN Y. There are two set of clients one set of clients residing in VLAN A needs to use DHCP serever 1 in...

Are u talking about 802.1p, setting priority bits based on the DSCP markings. Thanks, Vinu

Hi, Can some one help me with congestion control on ethernet frames. How can I discard the frames when there is a congestions. Voice traffic shouldn't be dropped, but the data traffic can be dropped. On a layer 3 we have DSCP markings. Thanks, Neto

Hi, Can some one help me with congestion control on ethernet frames. How can I discard the frames when there is a congestions. Voice traffic shouldn't be dropped, but the data traffic can be dropped. On a layer 3 we have DSCP markings. Thanks, Neto

Thanks Guys...!! Two most important functionality is, 1) Spanning Tree 2) Router management Traffic Neto...!!

Hi Geeks, Its a simple ques?, but I don't know the answer. Why do we need a native VLAN on a trunk other than specifying the port as Trunk mode. Neto...!!

It looks like your default gateway is not in the same subnet. You will have to make sure that 192.168.1.1 is in the same VLAN subnet as VLAN 2 for the Extreme to route the traffic. I go with ExtremeTek, you need to enable IP forwarding in both the VLAN's. Or change the IP address of your...

sorry to say, I tried...but...couldn't.... Neto....

Hi Guys's, For a Classless IP for example 192.168.0.0/27, the assigned IP addressess would be from 192.168.0.0 to 192.168.0.31 . Since 192.168.0.0 is a subnet IP address, I know we can't use it to assign any host with that IP. How about the last IP in the subnet 192.168.0.31, is there any...

yup.. Neto...!

what about optical for gigbit ethernet. Neto...!!! "you are running fast to remain in the same place

Thanks, The differnce in hardware b/w the ethernet and fast ethernet would only be in the TX and RX or even there is change in the physical medium. If there is a difference in the physical medium what is that !! Neto...!!! "you are running fast to remain in the same place

Thanks for the info, Here I have a scenario were we have created VLAN's for routing the traffic on Extreme 48Si. But all these VLAN's use the IP address. IP address can be resolved only at Level 3 and VLAN's can be resolved at Level 2. I am getting confused here, since the switch needs to do...

what is the speed that differentiates an Ethernet port from fast ethernet port. Neto... "you are running fast to remain in the same place

Hi Guys, Can some one explain the difference between Fast Ethernet and Ethernet. Neto... "you are running fast to remain in the same place

Hi Guys, I have seen people talking about L2 and L3 communication. But when it comes to extreme I have seen people mentioning about Extreme as a L2 bridge and gives it no respect for its L3 capability. My question is if one side of the Extreme is connected to the Router were it will have to...

LawnBoy is right!!!. I could reach the aol.com using my internet explorer, but if I try to do a tracert then I am failing at the 5th hop, I am Just going out of my company's network and then it fails at the next hop. I feel most of the network routers will have disabled a reply to tracert and...

Now I am bit confused, i think you have the PC's and the other devices connected to the 48Si right. 48Si is then connected to the router. In my previous post "config Internet protocol mnet" i did have this command line, hope you have replaced "mnet" with "ip" when you were loading it. If this is...

Here are the commands, create vlan Internet config Internet tag 20 config Internet protocol mnet config Internet ipaddress 192.168.0.1/24 config Internet add ports 7-26 (Configure the ports you like) config Internet add port 3 tagged (This is if you use two switches for redundancy)...