Good idea. I wouldn't mind this feature myself, but no way that I know of at least.
John Lever
Senior Systems Engineer
Diversified Computer Solutions
Columbia, SC
This may sound overly obvious, but have you reset the phones yet? The phones only pull down the ringlist upon their initial registration.
If not, try Settings, **#**.
John Lever
Senior Systems Engineer
Diversified Computer Solutions
Columbia, SC
Absolutely. There are specific part numbers for the Unity Express License when integrating with CCM.
John Lever
Senior Systems Engineer
Diversified Computer Solutions
Columbia, SC
This is actually the case on most all newer software loads. Cisco's reasoning was that there were some customers that wanted to use that sequence in their route patterns. ???? Why is beyond me.
John Lever
Telecommunications
Richland School District Two
Columbia, SC
Unless I misunderstood the question, its not the phone system, or switch, that controls access to your local Public Safety Answering Point (PSAP), but rather your service provider. VoIP systems connect to the PSTN and like any other PBX or KEY system, access the same exchange. Now, if you are...
Service URLs could be lots of different things. Yes, the SDK includes some samples like a clock that runs as XML that you could run off of IIS on a 2K or 2K3 box. There is no additional software needed from Cisco in order to add services. Berbee even hosts a few simple XML apps that you can use...
I think what Paul is saying is that he's not using Call Manager, but rather Call Manager Express, so there is no /ccmuser page to work with.
John Lever
Telecommunications
Richland School District Two
Columbia, SC
I see no reason why you couldn't keep it pretty simple as far as Directory Numbers go and just go sequential. With 5 to 20 phones at each site, that would make the most sense. We use a 5 digit internal dialplan, but this is because we have over 30 sites with 100+ phones each.
John Lever...
I was actually referring to the new Skype for business which to my understanding can be used entirely within ones organization, with a distributed design, just like the normal Skype, but without requiring any Internet access.
John Lever
Telecommunications
Richland School District Two
Columbia, SC
Some routing issues, possibly? Can the routers at least ping the ip address of the remote router's AIM-CUE?
John Lever
Telecommunications
Richland School District Two
Columbia, SC
Weird. My only thought is that the routers do not have a dial-peer to match the VM pilot number for the other site's voicemail.
John Lever
Telecommunications
Richland School District Two
Columbia, SC
DirTransfer is used to join two calls on hold while dropping out of the conversation. So like this:
Call 1->Hold
Call 2->Hold
DirTransfer
Call 1 and Call 2 are connected. You are disconnected.
John Lever
Telecommunications
Richland School District Two
Columbia, SC
Open your ODBC Control Panel (by default, it won't show up in Windows XP), so go to START, RUN, odbccp32.cpl
Its there that you will add a System DSN using the SQL Driver. You'll have to give it the address and authentication information for your SQL server. Its best to create two sources here...
Hehe. I can certainly feel that way at times. Shoot, I've been doing CM for two years now and I still learn new stuff every day. To be honest, I'm not quite sure what you are looking to return. But I think your key here is authCodeDescription in the Tbl_Billing_Data table. You will need to have...
Ummm, SSH? I only have CM5 in a test vmware session, so I don't have a lot of experience with it, but I doubt its open to just telnet. Haven't tried it.
John Lever
Telecommunications
Richland School District Two
Columbia, SC
The trick is not to have the actual phones themselves in the schedule based partition, but in a partition which is accessible by the CSS assigned to your Unity MWI ports.
We have an Admin_PT partition for directory numbers which should always ring and a TeacherPhone_PT partition for DNs which...
You know, the more I thought about it, this isn't a problem afterall. You simply specify a few Voice Mail ports with a different CSS and set those ports as the only MWI dialout. Works like a champ. Wish I had thought of this sooner. Thanks astros for getting the 'ole wheel spinning.
John Lever...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.