thread798-1710927
you need to restart the web services;
connect the element (signaling server) via an SSH session, and login using the admin2 credentials
at the Oam prompt type in: appstart Jboss-Quantum restart
it will take aprox five minutes to stop and restart.
then it will return with the...
re: thread798-1710927
You need to restart the web services on the signaling server.
Via an SSH session to the Signaling server log into with admin2 credentials
and at the oam prompt: appstart Jboss-Quantum restart
it will take about five minutes to restart the service.
then will return with...
I'm running TM 4.0 I'm connected to three PBX to draw CDR and Trunk data: One in the same building, and the other two at remote sites, connected across a VLAN. Having trouble with the buffer loosing connecion. If I reboot the TM server, then can re-establish the buffer connection. The two...
Using that URL and changing to the IP address for the system worked.
That's a nice work-around on the problem.
If I could find the place to change the link address for the launch callpilot app within the BCM element manager application, think it would fix the problem.
Nortelphnguy
-- "You're...
Have two BCM 450s and a BCM 50; accessing via Business element manager:
Configuration tab\applications\ voice messaging/contact center
when I launch the manager I get a window that says;
there are multiple network adaptors
please choose the address to use
it give the IP of my desktop pc
and...
I have a BCM 450 running on software release 6.0.
I'd like to change the outgoing CLID to either reflect the calling phones' number, or send a specific number (our Cust Svc number at another location)
Getting ready to move existing PRI to a new carrier.
I'm interfacing now with an E5 Switch with ATT. MY settings on both my D-channel and route (IFC for the DCH, and for route are ESS5)
The new PRI from the new carrier will be from a Sonus switch; it will have the same protocol; ESF/B8ZS.
As...
I'm looking for recommendations to dial into my Meridian PBXs. Up untill now I used Procomm + 4.8. But the MFG says is not completely compatible with Windows XP. That would be ok as I only use it to dial into the PBXs. Unfortunatly my company will soon be going to Windows 7.0.
Other...
I have a BCM 400 on an UPS. I'd like to be able to execute a graceful shutdown when the UPS reaches 20% charge left. Can I load Power shute software on the BCM or is there another way to achieve this?
Nortelphnguy
-- "You're Never Alone When You're Near A Phone"
...Lily Tomlin - aka...
I have an UPS on my Callpilot voicemail server (model 330r)
I'd like to execute a graceful shutdown when the UPS reaches about 10 minutes left of charge, after a power failure. Can I load Power shute software on the callpilot server. Or is there another way to achieve this?
Nortelphnguy
--...
Procomm Plus is not compatible with Widows XP. Per the symatics web site it will work with limmited functionality. Is there another comm software that will work with XP.
Nortelphnguy
-- "You're Never Alone When You're Near A Phone"
...Lily Tomlin - aka "Ernestine
I figured it out!!!!!!
Via the Data Buffering access window,along the toolbar at the top of that window there is a connection icon. One can toggle between disconnect and connect. Then confirm in LD 117 in the PBX with a =>Stat buf command.
Nortelphnguy
-- "You're Never Alone When You're...
Contact your local telco. They will have a department that deals with nusance calls.
Nortelphnguy
-- "You're Never Alone When You're Near A Phone"
...Lily Tomlin - aka "Ernestine
Our OTM went down due to a power failure. I disabled the buffers in the PBX and after restoring the OTM server I am able to do all functions as before. When I re-enable the buffers read as follows
=> stat buf
CDR ENL
TRF ENL
STN DIS
Storage space is 6.3% full
Not connected
I don't...
Our OTM went down due to a power failure. I disabled the buffers in the PBX and after restoring the OTM server I am able to do all functions as before. When I re-enable the buffers read as follows
=> stat buf
CDR ENL
TRF ENL
STN DIS
Storage space is 6.3% full
Not connected
I don't know how...
I have a FastRAD on an existing system and there is no information on it's user password. Is there a way to reset the RAD to the factory default, or hack into it and change the password?
Need to build a phantom loop for desktop faxing on an Opt.11........the loop number on phantom loops don't correspond directly. And not sure how to fill the fields when building in LD 97....open to guidance.....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.