BCM - CLID outgoing

[nortelphnguy]

I have a BCM 450 running on software release 6.0.
I'd like to change the outgoing CLID to either reflect the calling phones' number, or send a specific number (our Cust Svc number at another location)

 

[curlycord]

What type of lines?

Use OLI for PRI

No can do on POTS

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[nortelphnguy]

PRI

Nortelphnguy
-- "You're Never Alone When You're Near A Phone"
...Lily Tomlin - aka "Ernestine

 

[nortelphnguy]

PRIs - outbound calls sending BTN of trunk

Nortelphnguy
-- "You're Never Alone When You're Near A Phone"
...Lily Tomlin - aka "Ernestine

 

[norstarboy125]

In some cases Telco takes care of that.


Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[marice]

What ever you put in the Public OLI will be sent, assuming the LEC allows it.

 

[snowman50]

you can only send out numbers that come down the ISDN pipe
I mean the numbers you use for calling in such as the main bearer number and any DDi numbers.

You cant send out other company numbers otherwise you could pretend to be anybody.

Oftel dont allow it unless you apply to them and pay a monthly fee for the Privledge.

 

[curlycord]

i.e if the carrier gives you a range of DID's those DIDs are enters as allowed on their end.



=----(((((((((()----=
curlycord

http://www.curlycord.com