LD 117 guidance

[nortelphnguy]

Our OTM went down due to a power failure. I disabled the buffers in the PBX and after restoring the OTM server I am able to do all functions as before. When I re-enable the buffers read as follows

=> stat buf

CDR ENL
TRF ENL
STN DIS
Storage space is 6.3% full
Not connected

I don't know how to change the status of the "Not Connected"

I've checked and reconnected physical connections to the link and all are intact.


Nortelphnguy
-- "You're Never Alone When You're Near A Phone"
...Lily Tomlin - aka "Ernestine

 

[dlesap]

You cannot change it to connected. When OTM retrieve the CDR from PBX then it comes connected. It's a small time slot, depending how often OTM retrieve data per hour.

 

[nortelphnguy]

I figured it out!!!!!!

Via the Data Buffering access window,along the toolbar at the top of that window there is a connection icon. One can toggle between disconnect and connect. Then confirm in LD 117 in the PBX with a =>Stat buf command.



Nortelphnguy
-- "You're Never Alone When You're Near A Phone"
...Lily Tomlin - aka "Ernestine