Search results for query: *

I need other 64. addresses to get out to the internet. They need to be directed to my internet connection which is the 0.0.0.0 192.168.150.3 route. Thanks, Doug

Ok, here goes. The no auto-summary didn't solve the problem. Here's what I am trying to acomplish. That single IP 64.14.***.** must arive at my ASA5505 as someone from my internal network tring to FTP to 64.14.***.***. In other words, source 192.168.150.100 ftp to destination 64.14.***.*** ftp...

Hi, I am running eigrp. Here is the routing part of the config. I really just don't understand this. It's driving me nuts. What am I missing? router eigrp 10 redistribute static network 192.168.1.0 network 192.168.111.0 network 192.168.112.0 network 192.168.116.0 network 192.168.121.0...

Thanks, but it is redirecting any ip address that begins with 64. to the asa. We have three different companys we work with that have 64. addresses and with that in place the ASA gets the traffic. Any ideas why? Thank you, Doug

Hi Guys, This is driving me nuts. I have a 3745 that I need to add a static route to. I have two routes that this concerns. One is my default g/w route. 0.0.0.0 0.0.0.0 192.168.150.3 This route allows my router to send all unknown traffic to the internet. I have another route that I need to...

Management wants it inside of the firewall. So I guess that's my cross to bear.

Ok, here's what I'm tring to do.On the remote end, (they told us what we need) they have a cisco vpn concentrator. We purchased a cisco 5505. We need to be by corporate f/w, behind our main firewall. So on the inside we have a class c network. 192.168.0.0/16 . They have give me two ip's. Their...

Hi Guys, Well, I am new to ASA. I have been usin Cisco routers for years and I have a Checkpoint firewall. Here's what I need to accomplish. I have an ASA5505. I have a vendor that has provided a VPN Peer address and a FTP server address. Here's where it gets tricky. The ASA is inside my...

Hi Guys, I am trying to figure out why the first 2616 has caller ID and the second does not. Any help would be greatly appreciated. We are on rls 25.4 with Symposium Express 4.0. DATE PAGE DES DES ADMIN TN 014 0 00 15 TYPE 2616 CDEN 8D CUST 0 AOM 0 FDN 7000 TGAR 1 LDN NO NCOS 6 SGRP 0...

Hi Guys, I am trying to figure out why the first 2616 has caller ID and the second does not. Any help would be greatly appreciated. We are on rls 25.4 with Symposium Express 4.0. DATE PAGE DES DES ADMIN TN 014 0 00 15 TYPE 2616 CDEN 8D CUST 0 AOM 0 FDN 7000 TGAR 1 LDN NO NCOS 6 SGRP 0...

Hi Guys, This pertains to programming a Cisco 2801 with a VWIC-2MFT-T1. I am replacing an old router with a serial card and an Adtran CSU/DSU. The ADTRAN states that it uses these settings. DS0 1-12 NX 56-64 DS0 13-24 DSX-1 How would that translate to Cisco programming? It is a 2801...

Ok, they may seem dumb, I have three cabinets. I need to know how to figure out card numbers. The manual says disc s c, what does this mean? Sorry, Doug

Hi Guys, Here's an easy one I hope. I have an ITG card I need to disable to FTP IPL30502 to the card from OTM. It says FTP failed when I try to transmit the software from OTM but then it says the card needs to be disabled in the help. Anybody familiar with this procedure? Any procedures or...

Hello, I am trying to setup a new CDN for our Symposium Express call center by copying a previously setup queue. However, AACQ does not come up. Does anyone know how to make that prompt come up? Thank You, Doug

The PBX is on 25.40 OTm I am not sure of. The CS1000 is at a different location than the Option 11 25.40. I figured out how to upload the firmware using OTM. Now I just need to figure out how to get the firmware of off of the CS1000.

Hi, You go into LD2. first, do a TTAD this tell time and date. .ttad FRI 15 06 2007 09 14 58 Thens do a STAD. .stad 15 06 2007 09 17 30 This changed my current time by 3 minutes. Just remember, do not type the abreviation for the day of the week. Doug

The CS1000 is at a different location. Can I still do it?

Thanks Guys. I should have let you know 7000 is VM. I figured that's what they were but I wanted to make sure the system wouldn't be using them for anything. Doug

Hey Guys, So I am cleaning up our Option 11 that was upgraded to a CS1000 running Succession 4.5. I found about 20 ACD's that look like this: TYPE ACD CUST 0 ACDN 2124 MWC NO DSAC NO MAXP 1 SDNB NO BSCW NO ISAP NO AACQ NO RGAI NO ACAA NO FRRT SRRT NRRT FROA NO CALP POS ICDD NO NCFW 7000 FNCF...

I also have a CS1000 running 4.5. It appears in element manager like we already have IPL45088.p2 on the server. Can I get it off of that server?