Search results for query: *

Here's config for router here, other router is still off site. Remote router is fine, it's this router that drops off the network when ever the it's plugged into the switch along with the Alvarion(wireless radio), remove the Alvarion and it works great...

Ok I have a remote office that connects via two Alvarion wireless radios 30mbs bridged with 128wep . The office is on our subnet and it works great. Now another office in the same building wants connect to one of our servers via through our network (they currently vpn into it over their DSL). No...

got it. my pix setting were ok. had to go into the registery on the pix server and remove the old ipaddress from the citrix-ica value. it didn't change when i made the changes from the manager thanks for the help

oops I cut that out when posting, my ACL in has this access-list inside_access_in permit udp any any (hitcnt=0) access-list inside_access_in permit tcp any any (hitcnt=0)

Trying to redirect citrix clients to a interbal server. I can access the https login screen and the list of application show up, but when I try start a application it always fails to connect to citrix server. After that I'm unable to connect back to the citrix login site, I have to reboot the...

Have you added or removed any programs? Also disable your virus scanner and try it. MMC reinstall, http://www.microsoft.com/downloads/details.aspx?familyid=97C2AD9D-D537-4B64-A79E-4E58BAACFF7A&displaylang=en

Yea, I was afraid that was going to be the answer. I'll have all of them on the this domain soon, I just wanted a quick fix until I get them all moved over. I was thinking there was a registry hack to allow this. Thanks for all the help

Sometimes if you have SMTP fixup protocol turned on a firewall you will get "500 5.3.3 Unrecongnized command". Which would cause problems with your email.

Is it a PIX firewall?

Do you or your ISP control the firewall? Need to watch the firewall logs. smtp test http://support.microsoft.com/default.aspx?scid=kb;en-us;304897

I wouldn't use the SBS server as the VPN, you need to setup a separte server with ISA running on it, this way you can setup your vpn and restrict access to the rest of your network. If you already have a firewall in place then you could just setup a server running "routing and remote access" and...

I had already set the security to allow everyone print access, I even gave them full control and still they were required to supply a user id and password. The event log shows "event id 529", which means their not authenicating.

I'm moving my win2k print server over to a 2003 server with AD. Printer setup was no problem. User's who authenticate to the server have no problem adding printers or printing, but others who don't have account on the server are unable to install a printer without out first suppling a user id...

Have you tried a cross over cable?

Well I believe in the Cisco fairy, I leave last no traffic, I come into today and both sides are talking away. Thanks a whole lot for all your responses Jamie

Ok now I'm unable to see anything behind Router B, I can ping to it's inside interface but nothing after that, before I was to see the entire network. I changed the routes to 1 and lost connection, when I changed them back I was only able to see the inside interface on each router, that kind...

nerver mind fixed that

I noticed on router A interface serial0/0/0 says NVRAM and router B says manual

I'll try using the ip address and see what it does, but if I take out the 2 I lose connection.

Did set clocking on Router A