Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tordoffm

    Easy One? HP Proliant ML350 SCSI Hard Drive LED Flashing

    Hi Mdcr, Well, this should be pretty straight forward - should be! Judging by the sizes you've quoted, it looks like you're running RAID 5 - questions are: Software Raid or Hardware Hot Plug Drives or not Do you have a good backup???! Are you running 2000 or 2003 server? If so, and you're...
  2. tordoffm

    Using a tape from 8.0 on 11d

    Hi Madlife, Did you find out if this worked? I'm installing a new server tomorrow with 11d, and restoring from their old server tapes - which used 8.60...! Hmmm... maybe I'm best installing 8.60 on the new 2K3 box (if it's compatible!), get the data restored, then upgrade to 11d from that...
  3. tordoffm

    SNMP Insight Manager Agents on DL140?

    I'm guessing the DL140 (any Generation) doesn't support the Insight Agents. If you go to HP.com, Software and Drivers, enter DL140 - G1, G2 or G3), no Proliant Support Packs (PSP) are listed - making me assume that they don't support the Insight Agents. Like the damn swarms of ML110's that I...
  4. tordoffm

    HP Proliant 350 G3 Raid 5 rebuild

    You can Extend the Array while the server is online. To do this you would: Remove one 36GB Drive and replace with a 146GB. Allow RAID to re-build. Remove 2nd 36GB Drive, and replace with 2nd 146GB. Allow RAID to re-build. Remove last 36GB Drive, and replace with final 146GB. Allow RAID to...
  5. tordoffm

    Remote Insight Board

    Juniper911, I came across the same problem. Even after disabling the bugger it appeared as failed... and after upgrading the RILO Firmware (as recommended by HP) - to fix this exact issue, the damn thing still reported as failed in SIM!!! Go into Control Panel, HP Management Agents, and move...
  6. tordoffm

    C$ share removal

    Good point... very true that the $ sign makes it a hidden share... So yes, anyone who is connecting to it, is doing so by specifying '\\[servername]\c$', and very unlikley to be browsing - unless something has gone seriously wrong that stops the hidden share being hidden...
  7. tordoffm

    C$ share removal

    C$ is an admin share, and has to exist - hense the reason why windows will re-create it on re-boot. I can't remember the NTFS default permissions, but usually something in the lines of 'administrators/full' and 'domain administrators/full' - sounds like all your users are Domain admins! Bit...
  8. tordoffm

    Raid configuration

    If you download and install the latest PSP (Proliant Support Pack) - I think 7.80 for 2003, and 7.51 for 2000 server - this will include HP's Array Configuration Utility (ACU). Run this, and it will scan for SmartArray controllers, and in there (assuming it finds any) it will give you details of...
  9. tordoffm

    Error installing SP2 on SBS 2003

    Hi Debbie, Not sure exactly, but can you copy the SP2 I386 folder to a drive/share somewhere, and run it from that (and make sure you have write permissions!)? Also try changing the drive letter of the CD Drive, and see if the location it moans about follows the CD Drive letter - may not prove...
  10. tordoffm

    CIM 5.3 client (not web) Password removal

    I know it doesn't solve the password problem directly, but can't you remove CIM 5.3, and install CIM 5.5 (the latest version before it moved to the Web Version). Search HP for SP19778 - this is version 5.5. The version control no longer works, because its so far out of date - but this version...
  11. tordoffm

    Adding Office 2003 and Office 2000 ADM Templates into the same Group

    Hi, I've added the 2007, 2003 and 2000 ADM Templates (I also added the 97 ADM's, but nothing seemed to get added relating to Office 97!). I've simply used it for Disabling Auto Archive in Outlook - but it worked/works fine. Can't guarantee you won't have problems, but I didn't!!! Thanks, Mark
  12. tordoffm

    AS2000 caroot password reset

    Thank you very much Cyklops. I've not done much with 2000 or V9, 11.x is where I started! It has worked a treat. Thanks, Mark
  13. tordoffm

    AS2000 caroot password reset

    Is there a way of resetting the caroot password in AS2000? I'm trying to run a dbdefrag, and its prompting for a username and password - and I don't know it. Although, after a bit of digging, it looks like the username is 'arcroot' - I still don't know the password though! Everything I can...
  14. tordoffm

    802.11 Super G (108Mb) antenna upgrade...

    Thanks for the answer - thats a great help. I'll get hunting for an aerial now then! Mark
  15. tordoffm

    802.11 Super G (108Mb) antenna upgrade...

    Hi all, I'm needing to purchase two replacement (bigger and better) antenna's for greater range. The router I've got supports 802.11 Super G, which has the 108mb transmission rate, as oppose to the 802.11g - the 54mb transmission rate. both 11g and 11 Super G run at 2.4 Ghz. Can I use an 11g...
  16. tordoffm

    Outlook 2003 - Meeting request acceptance being forwarded...somehow !

    Long shot, but have you tried 'Tools | Options' then 'Delegates' tab, while logged onto Colleague B's Outlook. The Delegates settings can be a swine sometimes, and cause these sort of headaches - especially if you have users assigning other permissions when they don't really know what they're...
  17. tordoffm

    Dell Servers in HPSIM5.1

    L4ts, Thats great news! That is the problem I'm having - as I have no Trusts, and can't create any (due to policies, etc...!), I have no way of entering Domain authentication details - I have tried like you, and putting 'domain\username' then password - however, with the fact that the...
  18. tordoffm

    Dell Servers in HPSIM5.1

    Hi L4ts, One thing I forget to mention!! I've read many posts on the HP Forums that suggest deleting the servers you've discovered (or the problem Servers), and re-run a full discovery. This - apparently - can resolve many problems - and would possibly fit with the issue that your new Desktop...
  19. tordoffm

    Dell Servers in HPSIM5.1

    L4ts, I am having half the problems you are! My Dells and HP on the LAN are seen fine - pulls back Dell model numbers and OS version. However the ones I'm talking to over the WAN do not. They simple display 'Dell' with no OS or model number. The ones I'm connecting over the WAN are only using...
  20. tordoffm

    Dell Servers in HPSIM5.1

    L4ts, I have got fed up with the seriously SLOW performace that having SIM running on my Desktop is causing (I was testing it, to make sure it does pretty much what I want...). So, I have plonked it onto a server - and I can't be assed with any migration options - I've settled for a fresh...

Part and Inventory Search

Back
Top