Search results for query: *

I have used F903 to activate feature code range but the only one that half works is F983. With F983 I get the password prompt but cannot log on(password error). I cannot use F985 to reset password.

I am working on a CICS with 4.2 SW and a Flash2 with 2.0 SW. The customer wants the Flash installed but I cannot access F983,F9*3 etc. I have disconnected the Flash and removed the code (F983....test...remove)from the CICS but it still does not work. Compatibility charts show that SW should...

Thanks to everyone for their assistance. I was able to upgrade but I had to powerdown as soon as I saw the 'Applying template' message. Special thanks to hawks.

I am having trouble upgrading from 4.2 to 7.0...the KSU doesnot come up. Anyone with experience at this upgrade?

Thank you for the reply phoneguy. MB100 is set to the attendants number and message waiting is set to yes for the attendants local but when I access change mbox, it says message notification is disabled. Should I try a reboot and see if this helps? I am hesitant to reboot due to the age of this...

I am working on a 8 x 24 with a Flash 4. I am having trouble getting the 'Message For You' to display at the Attendant set when there is a message left in the Gen Del MBox. The settings seem to be correct but there is no displayed mesage or stutter tone. Any ideas?

F*0 is used to verify what is assigned to a key. I replaced the CAP and the problem was verified as a defective CAP. This is a first because I have never seen a CAP cause a system restart. The 'No party connect' trbl experienced by the other erception position also was solved once the new CAP...

The call is answered and not put on hold, the receptionist hits the VM key(F*0)and enters the VM#......response is 'no party connect'. It works at times,others not. If you disconnect the set then it will work great for 30 minutes or so and then back to the same old trbl. Yes I have told the...

I am working on a 8 x 24 with DR5 DS and a Flash 4. There is a central answering position (M7324 with a CAP) that displays the message 'No Party Connect'(at times) when transferring a call to VM. I have tried adding intercom keys but this does not resolve this trbl. I also tried reversing the...

I have a set that displays 'Calls For You'. Does anyone know how to clear this and what it is referring to?

CICs was not seeing it in maintenance. I unplugged the port about 5 times before it finally decided to wake up. Not sure what was going on but in hindsight I should have probably powered down both the Flash and the CICs....maybe then it would have recognised the new ports. Thanks for the reply.

Yes,ist port is on port 111 and second port is on port 109. I would have liked to make them consecutive but they want to keep loc 232 and loc 230.

I am working on a Flash2 and would like to install the Flash4 expansion card. It is being used with a CICS 1.0. The problem is that it does not recognise the second two ports and when you phone the Flash local for the expansion it just goes to busy. I have gone into maintenance and disabled and...

Thanks atcom. This helps immensely.

I guess one thing I should let you know is that there are 6 Departments covering 24 stations. So If I list departments in the Home Menu and then make each point a path. When I reach the first department Admin, I have 3 extensions to cover(which would use 3 paths on evel 2 ?) That would only...

I guess I am having trouble with interpetting the manual. It says 2 Trees,Home Menu 0(is this where I would list Departments as one of 8 paths?) Is Home Menu level 1 ? After you select the Dept. you said make it a menu type(is this level 2?). So Dept 1 is Admin. So next menu is dial 1 for Sally...

I have a Flash 2. I want to set up the CCR tree as follows. Greeting...Home Menu(For Admin Press 1,For Sales Press 2 etc). When your press 1(for Admin) you are again given options Sally press 1 Joe press 2 Mary press 3. When you press 1 you are ringing Sally's extension and if she does not...

Hope someone remembers the SX100/200 analogue. The hotel wants to restrict 1900 calls from all rooms. Hoping someone can assist as this switch is before my era.

I understand what you mean now. Thanks so very much cwc3.

Does 99 equal station programming mode? If so where can I find info that list what 99 12 translates to?