Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. IndyRich

    Nortel 11C Ground to Loop Start on Analog trunk card

    LD 14 id the only needed. change SIGL to GRD
  2. IndyRich

    CS1000 TIE to TIE and 5 digit dialing plan

    On your 81C you need to build a DSC for each extension number on "the box" that you wish to 5 digit dial. These DSC will reference a RLI that points to the tie trunks that connect to the box.
  3. IndyRich

    Can't indial a CDP and have it dial of site again.

    It sounds like a restriction problem. The incoming PRI trunks will have to have an NCOS and TGAR that will allow them to make an outgoing call. I would verify this is the case on the incoming trunk TN.
  4. IndyRich

    (Dch Message) Cause #42 SWED EQIP CONGESTION

    Check the DSEL setting for the incoming and outgoing routs. If they are different that could cause the error that you are receiving, especially if the incoming rout is 3VCE and the outgoing rout is not.

Part and Inventory Search

Back
Top