Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. BigJakeG

    2004 ip firmware

    The phone is DHCP full so as the BCM50 and the address of the BCM is the same of the S1. I dont have it going there a swicth just testing one from the LAN port of the BCM 50. 192.168.1.2 S1 192.168.1.2 also 7000 is site
  2. BigJakeG

    2004 ip firmware

    My ip2004 can't find server.The firm ware is 0604DAD on the phone.I think it is the firmware that is causing the problem. I have added on the patches on it 2.0 release.My laptop will dhcp just find out of the LAN port. Does anyone know what is LLDP is on setup of the phone config part
  3. BigJakeG

    2004 will not boot up

    I got a BCM50 that was upgrade to 2.0 and the IP phones won't DHCP. My laptop will DHCP and my I2005 phone will work but the I2004 will not. I have tried three 2004 phone and they all do the same It kepts saying LLDP not revieced. I am lost
  4. BigJakeG

    caller ID with analog trunks

    I have a 406v2 3.2.54 software on this system I have a 16 port ATM Mod. with 10 pots lines installed on it. On port 4,8,9,10 CLID shows up fine and the rest of the port I can not get caller ID to pass through. All lines under analog tab is set to Loop start CLID and the data dump From the CO...
  5. BigJakeG

    Inbound CLID not displayind

    I have installed a IP 406 v2 with one 16 port ATM ver. 3.2.54. When a inbound call comes in the display on the phones show externl>Main. I have check lines analog tab the line are set on loop start CLID. I have turn up the gain on the lines. I have check if the data dump is coming over the lines...
  6. BigJakeG

    Installing BCM Element on Vista

    I can't get BCM50 element to install on my laptop with vista.Need a little help Thank you
  7. BigJakeG

    flashing power LED light on BCM 50e

    Thank you for that info Marv01. I had them send me a new one.
  8. BigJakeG

    flashing power LED light on BCM 50e

    I do not a have an expansion mod. connected on the unit.
  9. BigJakeG

    flashing power LED light on BCM 50e

    Can not get line active on the bcm50e. All keycodes are good and active. Under the resource the int trunk are saying enabling... I think that as something to do with the flashing power LED light on the front of the unit.
  10. BigJakeG

    BCM 50 Echo on Analogue Lines

    I am having the same problem with the bcm50 call me at 270-392-0843 or 270-392-7647. I would like to talk to you about the system and the echo on the phone thanks Jake Goodwin
  11. BigJakeG

    echo in handset

    I install a BCM50 and I am getting echo in the hand sets. I have tried having thing that I can think of Please call me at 270-392-0843 thank you

Part and Inventory Search

Back
Top