flashing power LED light on BCM 50e 1

[BigJakeG]

Can not get line active on the bcm50e. All keycodes are good and active. Under the resource the int trunk are saying enabling... I think that as something to do with the flashing power LED light on the front of the unit.

 

[option11newby]

Silly queation, have you got the lead for the expansion chassis connected to either the 3rd or 4th port on the main unit.

The reason I say this is because I know an engineer who had a similar issue, and found he had the lead plugged into the LAN port next to the OAM port.

Regards

 

[BigJakeG]

I do not a have an expansion mod. connected on the unit.

 

[MarvO1]

I had a 50 do the same thing. Nortel replaced it. Heard thru the grapevine that this has happened to others.

MarvO said it

 

[BigJakeG]

Thank you for that info Marv01. I had them send me a new one.