Okay, chances are this question is going to open up a can of worms but I need some help.
My office has an old phone system...
M8x24-DS (NT5B20)
M12x0
M0x16
and a startalk NT8B70DB-93 software ver. 2.0.3A
Since this system only has two voicemail ports and we can't transfer to outside lines and...
I have an HP Laserjet 3200 that when plugged in will immediately turn the amber Error light on and will not display anything on the display window.
I've cycled the power on it, with and without the cards in it and still the same results. No error message, no abnormal sounds, just the lights.
I...
Hi,
Ideally I would like to have the AA pick up (after 1 ring) in the evening and the General Delivery Mailbox to pick up after 4 rings during the day.
This used to happen each night when our receptionist manually changed the operator status (under F982) but since we switched to having the AA...
Hi,
I'm sorry to start another thread on port forwarding but I'm a little confused by the other threads I've read on this matter but I'm sure I'm just missing something simple...
I have an internal server running terminal services (192.168.1.249)
I have a single router (PIX 506E) with an...
I need to reoder the value of the priority field in a table (table1). For example if I have a form called Form1 that displays the records:
RecordName Priority Description
Red 1 blah blah
Blue 2 etc.
Green 3 etc.
Orange 4 etc...
I want to be able to leave the same message in a group of employees' boxes.
I'm guessing I set up a group of mboxes in F983, Other, Glist but I don't know where to go from there once I make the list. How do I leave a message for that list in each of their boxes?
Thanks,
Colin
We're using Windows 2000.
...I have another bit of info:
If I take a laptop and print one of these documents to the printers jetdirect card I get the normal result. If I plug that same laptop into the parallel port on the printer and use the exact same driver (just switching the port used over...
I have an HP CLJ 4600N that does a great job printing 99% of my work but when I try to print something with some graphics in it it puts lines or blocks of black throughout the page.
I've tried printing using a PCL 5, 6, and PS driver. I've updated the firmware, I've tried replacing (HP) toner...
Thanks for the suggestion. I went into Configuration, Line Data, and changed the Prime Set to None for lines 1 through 4. I hope that was what you had meant. (sorry, still a newbie)
Still rings three times and then AA picks up. :(
One last question rather than create a whole new thread for...
I have lines:
1-4 on tree 1, 6 rings to AA pick up
5-10 on tree 2, 0 rings to AA pick up
BUT lines 1-4 pickup after 3 rings instead of 6.
I checked the DN(221) and it isn't set to forward on busy or no answer. It is in P/U...
Thanks for the help everyone. Its all working fine now....apart from the fact that my receptionist is bored since half her calls are now being handled by the AA. :)
Thank you so much for the information. I took a look and thats exactly what I needed to do. I'll put in place today after lunch.
One more question...Right now if someone is in either table and hits 0 they go back to my receptionist. I'd like it changed so that if they are in table 1 and hit 0...
I figure this is probably a stupid question but is it possible to have the AutoAttendent pick up certain lines?
I have two 1-800 numbers that come into 10 lines....each number rings on 5 of those (1st one takes lines 1-5 and the 2nd takes 6-10). All of these ring at the receptionist's desk. We...
I have an 860N printer that will print fine and then suddenly stops printing and gives me a "Paper Jam - Remove Paper Tray to Clear". This is from the main paper tray and when I open it there is no jam....a single sheet of paper is sitting on the seperator pad but nothing is really...
I have a table of data, one column of which is the path to an adobe acrobat file per entry. How do I put a field or button on my form that when clicked will open the corresponding acrobat file??
I tried putting in a hyperlink to it but it doesn't seem to work...any ideas??
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.