Hi all,
I would like some information on pppoe DSL connexion and vpn.
i want established with PIX a connexion with dsl and after, make a tunnel ipsec between PIX and VPN Concentrator.
i need :
Ip static address on outside PIX ? to established after a peer adress for tunnnel vpn ? yes no ...
Thanks awong.
Ok, i read this url. Ok, no problem. have you test VPN by 501 with IP fixed on this network ? Have you some information or configuration ? do you have test this configuration ?
FYI : No, i'm not in Montreal.... France -> West -> Laval City. sorry :-)
Regards.
Jerome Bordeau
Hi all,
I need help to know Pppoe or oa... with pix cisco.
My solution : I want to connect PIX 501 ou 506 to adsl connection. My isp run with PPPOA ....
What is the best solution ?
Can i connect PIX 501 to Modem ADSL ethernet and connect on PPPOe ? no ? if no, can i change connection type on my...
H Mike,
have you a tutorial to install this FrankenPix ?
When you boot, what do you install firmware ? You can use Rawrite directly on flash card ? Explain me what do you install this Firmware and question :
On PIX CISCO, we have a ID on each pix. This ID unlocked Des and 3DES, and Unlimited...
Hi,
You have make a cloned pix ! Great ! But what do i need to create a cloned pIX ? What's the bios sequence ? To create a cloned pix, you must have a bios's copy ? no ?
Best regards.
Bordeau Jerome
Hi,
What is your Firmware's version ? there is some problem with old version firmware (slow ssh, and if you control CPU's usage, your charge is 90%). Migrate or upgrade your firmware (6.2.2 actually).
Best regards.
Bordeau Jerome
France
Warning, check your flash memory with "sh mem" and "show ver". Your PIX 520 maybe doesn't support 6.2.1.
You must have for 6.2.1 :
Binary REQUIRES 32MB RAM AND 8MB FLASH
Bordeau Jerome - FRANCE
Hi shon,
your solution with PIX 501 or PIX 506 is very nice. The pix series is a good product, very easy to upgrade or downgrade, you have a text configuration with command "show conf" and if you pix have a troobleshooting, you can cut & copy with a notepad directly on the pix. This...
Hi all,
Yizhar have fully reason.
If you have a pix with 3 interfaces or more, it's important to used access-list but if we have in old configuration a "conduit", the new conf with "access-list" would have to need to rewrite all rules and defined a scheme of network and...
hi,
For my experience, i'm trying this:
3 pix : 1 pix 515 and 2 pix 506.
PIX 515
|
| 2 tunnels VPN DES (56 bits)
/ / Pix 506 Pix 506
When the Ipsec, ISAKMP is negociated, we have 40 % CPU charge and when all tunnel is...
If you interested, i'm using Cisco VPN 3000 client (Free) with PIX 515, this client is very easy to configure (3 paramters) and it's better than VPN Client Cisco. All the config is on the PIX.
Try it !
Bordeau Jerome
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.