Search results for query: *

Please house my problem is still on i cannot communicate both way with ip phones and analog phones.ip phones to ip phones both ways are okay no problem i check the DSP Card is working and the ip address of it is okay not taken by any equipment

Please what's the solutions to these problem,what can I do to solve it.the IP address for the Panasonic equipment as an example is 192.168.1.41 while the IP gateway is 192.168.1.10 and 192.168.1.43 for the phone.If there's any way you can assist me to solve the problem. Thanks

We dont have external call provisions only the intercoms extensions,and what do you mean by rough LAN Layout:

Kindly assist me my systems kx-tde600xe has analogue phones and ip phones working but recently i discovered that if you call the analogue phone from ip phone you can hear the the person who pick the call but you from ip phone you cannot hear him.What can be done to solve the problem.

The two other equipments are not far from each other,LAN Cable already layed for each of them and what link card you said can be used for these purposes. The problem of numbering systems of the two can handle. Thanks

THANKS FOR YOUR ASSISTANCE AND GUIDE ,I REALY APPRECIATE YOU ALL.We have already mount one main kx-tde600XE with 36 ip phones WORKING and two kx-tde600xe in two different buildings (BLOCK A AND BLOCK B) and they not connected yet we have done the wiring.We dont have kx-tde620 and all the 3...

I say thank you very much Obtsystems and OMONAT at least I have learnt a lot from your what to do.Please can you help me again on how to about with your with two suggestions on the purchase third-party SIP License and use of Analog Media GW and if two kx-tde 600 can be connected via gateway...

Please kindly help me out I have KX-TDE600XE installed but the two KX-TDE620 expansion shelf were installed in different buildings.How can we connect the two to the main equipment remotely since we are not using BUS-M Card, required to connect the Basic Shelf to the first Expansion Shelf but we...

Thank you for your response.The IP Phone we are to use is Panasonic KX-NT551X IP Proprietary Telephone. Kindly explain to me How to install IP Extension Card in the virtual slot.And kindly assist me with any other materials i can use for this problem.

Please Admin can somebody assist me on how to configure and activate ip phones on kx-tde600. I installed the equipment and the SLT Lines are working but my organisation want to use IP PHONE on the systems. We have IPCMPR Card with DSP 64 Card in the system.We have the activation keys for the...

pls where can I get psu fot ipldk 300 the one I have got burnt and I hope it didnt affect the board

Thanks to all of you because i thought that the two cabinets can take more than 96 extensions.It is now clear that the two cabinets can only take max. of 96 extensions .

MAIN CABINET: SLOT 1 - DTIB 24 SLOT 2 - DTIB 24 SLOT 3 - DTIB 24 SLOT 4 - DTIB 24 SLOT 5 - VACANT SLOT 6 - VACANT NOT USED MPB - MPBN CARD LMU SLOT - LMU 1 SECOND CABINET: SLOT 1 - DTIB 24 SLOT 2 - DTIB 24 SLOT 3 - VACANT SLOT 4 - VACANT SLOT 5 - VACANT SLOT 6 - VACANT NOT USED MPB - MPBN...