Search results for query: *

I have a group policy Server 2008 to redirect outlook pst files to a file server. Also running VMWare View 4.5. Just the last couple days one user is loosing their pst file. I was able to restore it and the following day same problem. I have not been able to recreate the problem on my...

BCM200 Ver 4.0.2.03 There are no hunt groups in place (I think we need to go to that.) This just started happening a few weeks ago. Incoming lines will ring but some lines and set you have to press the button to answer and the set is not actually ringing.

Not sure what work but it is now fixed. The DRT was set to 4 rings. Call forward no answer was set to 4 ring to v-mail. I need to implement hunt groups and get them using their v-mail. Thanks for the help!!!1

Opps I was multi-tasking AFter 4 rings the line only rings on couple phones. We need the line to ring every set until answered.

We have a BCM200 4.0 with POTS lines displaying and ringing at all sets. I have After 4 or 5 rings the lines will only ring on couple sets.

Version 3.7 build 2.4f

What does the values mean in the current system status monitor? Total Temperature Failures value 2162 and total power failure value 42601

does anyone know the cost to go from 3.7 to 4.0?

There is a reason why I don't want to upgrade to 4.0. The system can run for months with no problems. then all of sudden all the lights are flashing. Network services is down and unable to log into the BCM. We still have dial tone. The BFT was replace year ago I believe they are blue. A...

I have a BCM200 version 3.7 with no patches applied. Where can I get these software patches? I checked on notel's site and they are not available anymore. I don't have a reseller. Out in the middle of nowhere (Kansas) I also have a BCM400 version 4.0.203a needing patches also.

I think this was Friday the 13th which makes tomorrow Saturday. (I wish) I have BCM400 3.6 and needed to reboot and since the reboot I am now have that same problem. The other site is a BCM50 2.0 via VPN and an IPhone2004 at my house via VPN. I know there has been no changes to the system...

Loop guarded did not work for me. Had to change back to earth calling.

My line settings were set to Earth Calling. I changed them to Loop guarded. So far it has fixed my problem. Thanks for all replies!!!!!

They are connected to a GATM-8

only 2 of 6 CO lines Line064 in use by user L70 Line070 is use by user L64 Didn't know if that means anything or not....

BCM400 3.6 When I use the BCM Monitor tool I see lines that have been connected for days. I go out to the d-mark and test the lines and they have dial tone. What I do to fix this is reset the BCM. I don't like doing that during buisness hours.....