Search results for query: *

Getting sch0842 for NDS only valid for NI-2

getting sch0531 when trying to add ND2 to rcap (or even ND1) anyone have any ideas? not equipped for ISGF TYPE RDB CUST 00 DMOD ROUT 11 DES RATH TKTP TIE NPID_TBL_NUM 0 ESN NO RPA NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI2 ISDN YES MODE PRA IFC ISIG SBN NO...

yes, dch and mdsl disabled in ld 96, i get the following result DES USR IFC isig SCH6357 IFC SCH6357 Interface change is not allowed for UIPE D-channels. Severity: Info

Im hoping to change over to ISIG from EURO, i can do a chg on rdb pretty easily, but i cant do a CHG on ADAN can i? whats the easiest way for me to change over to ISIG with minimum fuss/downtime. I only have one PRI card in the system.

Turned out to be a PRI problem, thanks for all the help everyone, thought i was going nuts.

cdr built as follows TYPE CDR_DATA CUST 00 CDR YES IMPH NO OMPH NO AXID YES TRCR YES CDPR NO ECDR NO BDI NO OTCR NO PORT 3 CNI DGTS BCAP NO CHLN 0 FCAF NO

Thats the problem the CID is in there when i check msgi x on the d channels, and all the 164 info and the national/international information.

Having trouble with getting callerid on cdr records for incoming calls on an option 11c, succession 3, inc is set on cdr in the RDB, anyone have any ideas? it's a pri line, the callerid is appearing on the handset display. Below is whats appearing on the port, outgoing is working just fine. N...

rfwhite has it exactly right

Seen this once before caused my a failing drive in the mermail, caused many bizarre ripples across the system ,backup and try a new disk.

Spot on, has been bugging me all day.

This is driving me nuts, option 11, while on a call a second call comes in on my other DN on another key, i want to see the caller id of the waiting call before picking up, was convinced it was CNIA, but obviously not, any pointers anyone? currently setup as follows. CLS TLD FBA WTA LPR PUA...

Your exchnage server is flooding the DSL line at it's max 256k which will kill most DSL lines, you need to setup QOS on your router to slow down the smtp traffic.

right still no look on this, set up a cdp to to get to the other system (all of 3xxx) can ring the numbers no problem, dont particularly want cxfa on all the handsets it's to dangerous. Any more pointers?

would it be easier to just send a rang on extensions (say 3xx) down the route, how can i do that? cfw is currently set to 20

on an option 11 I have a new route that goes to another pabx, the users want to be able to call forward to ext's on the other pabx, i set rcls to INT on the route in the RDB, and set IDEF to yes in FTR_DATA in LD 15, but it still wont let me call forward (say the route access is 6916) i cant...

Thanks, hadnt done USID correctly

Ive programmed up a BRIL for an isdn router, added the end of line resistor, teh d channels signalling starts but no b channels ever comes up, it's a euro isdn card in a machine. TN 2 0 0 5 DES CB1 CUST 0 CTYP SILC OPT BRIL MISP 1 MODE NTFS B1CT VCE DTA B2CT VCE DTA LDN NO XLST 0 MTEI 8...

Excuse the noob question,Ive programmed up a BRIL line on my SILC, reloaded the misp to enable it and all looks fine, do i just patch it now to an outlet, do i need to add a terminating resistor (100 ohms for one phone?)? Im guessing the polarity is the reverse of the incoming ISDN trunks for...

OK, still lost, looking in ld15, is it in ftr_data, or can you tell me which type and prompt it is. Cheers.