Search results for query: *

Yes as per document these ports are required For H323 So I did the same, Also used public STUN Server to determine the field values, after pressing on RUN STUN, it only shows thay "STUN SERVER FOUND FEILD VALUES" under Network topology. It does not populate any data. And still phones are in...

Hello guys, need help to configure H 323 Remote phones 1. I have installed IPO 500V2 (R 8.1) 2. Forwarded all ports to LAN 1 IP Adress from Public IP (5060 & 5061, 54000-54500, 1719-1720,80,49152-53246) 3. enabled remote extension from extension and user tab ( enabled Power User) 4.Enabled...

Customer is not agreed for an upgrade i have to work on the current scenareo

hello Customer is using IPO 3.2 with VM Pro, before VM Pro was working on Windows XP,Currently the PC is crashed and customer wants to move the software ton Windows 7. I have installed VM pro 3.2 on Windows 7 without any error and configured with IPO Also configured all the required short...

worked fine [afro]thank you all [bigsmile]

OK I will try it and update you guys....... Thanks[smile]

To load it on the SD card I have to Visit on Site which not possible for some circumstances, i have to do it remotely and before the same procedure worked perfectly

Avaya IPO 500v2 With VM Pro

IPO 500v2

File: holdmusic.wav 480kb size 16bit 8khz mono 35 secs long I have added it to C/Program files/Avaya/Manager and reboot IP office. still i can hear the Old MOH which was uploaded month back with the same procedure. what can be the issue, kindly suggest

I tried with SIP Line and some time I am able to dial the extn no. and ringing on NEC but no voice while receiving Some times NEC System is able to dial to IPO extn no. but without voice.

When I am pressing the Extn No. 300 or 400, its showing "number Busy", found Cause 17 In System status Trace, i checked in telephony tab, Offhook station is unchecked

There are H323 2 lines, 1 is line No. 17 on which Extn seriese start with 300, line group ID is 4. And another H323 line number is 18 on which extn seriese starts with 400, Line group ID is 5. I am trying to dial 300 and 400

how to configure sip trunk to link NEC even i tried H323 with Qsig

@chrisag not working

@hairlesssupport I have voice networking lic in IPO

Thanks Guys for your help

Hey Guys, I tried to link IP Office with NEC, All the systems (Ip Office And NEC Topaz) are in same network (Connected by MPLS) I did the configuration in AVAYA IPO but always when i am pressing extn number then "Number Busy" is appearing on the phones Disply. NEC Topaz Extn Seriese starts with...

how to add league table in the system, because i am not getting required procedure can anyone tell me to how can i add league table

You can change it from user Telephony