Search results for query: *

Running Epicenter 5.0 SP3 and was having an issue with adding a discovered or just adding a Summit 400p to Epicenter. So I upgraded to 5.1, still no luck, upgraded to SP2 still no luck. Anyone seen this issue?

You can insert the new card and update the card, this will then upgrade the rest of the cards in your BD6816

your saying then that i can program my PBX to route number 123 456 7890 to a mailbox...i am not 100% sure how to do this, maybe you can guide me in the right direction...any examples of this scenario you have done in the past

the type of trunk it is coming in on is a PRI/T1 trunk

yea that is what i was thinking but thought maybe found a work around even using the ANI....

interesting scenario ... with a call center you get all types of calls especially if you several Toll Free numbers coming into the facility. Here is the question...has anyone been able to either redirect or block a specific number from traversing the PBX system. i.e. number 123 456 7890 comes...

I have a 2000 IPS system and need to have the ability to redirect/restrict specific numbers that are coming into our PBX. That is right INCOMING not outgoing. Has anyone had any luck preventing specific type of calls come into their PBX system.

Trunk queueing nor DND is active on this station

I have a station that when we try to assing e601 command for a call forward on the station we get a "data error" displayed. Any ideas?

Interesting scenario...we are running BD6808 and have fiber links to our closets that have Summit48si in them. We are interested in using the MACVlan Discovery within our network, has anyone ever used this and does anyone know if there is a way to send the MAC address from one of the remote...

Interesting question: Have an IPS 2000 system and have a question about whether or not a PBX system can do the following: restricting numbers from a destination to enter the PBX and ring to its destination. For example oringating number 123 456 7890 dials your PBX via ISDN/PRI and the...

Tn# CCV Index# CCV Step# Description Argument --- ---------- --------- ----------- -------- 1 1 1 Pause (secs) 6 1 1 2 Queue To Split 1 1 1 3 Announcement 2 1 1 4 Pause...

Okay here you go...have a scenario that runs a little like this.... a call comes into our Callworx and is queued to a split. it then sits in queue and after a period of 2 minutes max it is transferred to an extension which is setup as a Transaction directory in NeaxMailAD40. Which gives option 1...

I have a BD6808 with Two Vlans 192.168.1.0/24 Named Vlan1 and 192.168.2.0/24 named Vlan2. I also have a DHCP server setup and is connected to a port on the BD and the DHCP server has a static IP of 192.168.1.5. now if i set the other ports to macvlandiscover and enable them that any mac gets...

I have a facility where we will be implementing IP phones at a remote facility. My questions are as follows: what type of compression does the NEC2000 IPS have already if any as well as would the VCT16 compression card, recommended by a vendor, be required when we will be using a 2mb fiber link...

what is your email address?

Perfect E601 and E602 where not set properly. apprecitate your assistance.

I have been working on it and this is what i have found so far...the station is not in DND but when in DND it will transfer to voicemail no problem. When anyone calls the station it shows the station name or trunk id, but the incoming call to the station just rings and rings if not on DND.

The system being used is a NEAX 2000 IPS with NEAX AD-40 mail system with Dterm series E phones.

I have a station that is going to a busy signal instead of going to voice mail box...any suggestions...