Search results for query: *

I have Nortel Meridain optopn 11C PBX syatem. Some people saying that they cannot hear caller but caller is able to hear. This thing happing in middle of conversion and olny on outside calls. I checked the PRI and everything seems OK. What would be the problem? Thanks, Ajay

Thanks. The problem with CSU/DSU card. I replaced card and problem has been fixed. Thanks for the help.

Good Morning, I have Nortel Meridian 81C PBX system. I have 2 PRI connected to system. Recently I am getting LOSFA alarm on one PRI and SLIPR alarm on other PRI. I used RCNT command but alarm is not clearing. I opened ticket to PRI vendor and they says they tested both PRI and lt's clean. What...

I have old callpilot 1.07 (Win 95)voicemail. Is it possible to change password, create new voicemail or delete voicemail by dialing voicemail system? Dialup callpilot administration client only works in windows 95. Thanks,

Hi, How to access mainteance termainal for meridian option 81c? I konw I need to use SPER and feature code but I forgot feature code? I wants to check some POTS line. Thanks for the help.

See below. REQ: new TYPE: 500 TN 156 0 12 SCH0124 TN 156 1 SCH0123 TN SCH0120 TN **** OVL000 >*ld 20 PT0000 REQ: new* REQ: ! >err sch0124 > SCH0124 Card out-of-range (1-10). Severity: Info

I am not able to do stat. see below. PT0000 REQ: stat 156 0 11 PHANTOM LOOP NPR665 TIM784 12:37 10/5/2010 CPU 0 REQ: ! >err npr665 > NPR0665 This command is not valid on phantom loops, since phantom loops do not = physically exist. Severity: Minor * REQ: stat 156 0 10 PHANTOM LOOP NPR665

I get following error REQ: new TYPE: 500 TN 156 0 11 SCH0124 TN 156 1 SCH0123 TN

I am not able to add on 156.0.11.0. I tried and it's give SCH error. Yhanks,

I have Meridian Option 81-C, Release 23 PBX. I have Phantom terminal numbers (156.0.0 to 156.1.10). I want to add another Phanton terminal numbers bucause all Phanton terminals are used. Am I able to add another Phanton terminals and how? Thanks,

Hi, I have Nortel Meridian Option 81C, Release 23 phone system. How to do system initialization? I wan to do System initialization because some time calls are droping. Thanks,

Hi, I have nortel meridian option 81C, release 23 PBX system. My PBX time is going 5 minutes ahead. How to to fix this problem. Thanks for help.

Hi, I have meridian option 81C, release 23 system and I am tring to TIE line to 3rd pary Linux base VOIP system through PRI card (On option 81C) to Digium TE120P (PCI T1 card on VOIP system). In Linux VOIP I have switch type (D Channel) Nationl, Nation1 ISDN, ESS4, ESS5, D100 and TIE line...

Is anybody know how to program Meridain option 81C PBX system to connct differennt vendor phone system's voice-mail. I connected two system through T1/PRI card. Thanks,

How to change someone's voice-mail password from administrative mailbox on call-pilot.

I found the problem. We changed the PRI vendor and we have CLID has defined without DID that's why carrier is rejecting calls. Thanks,

Thanks, John. I pressed reset button on meridian mail 12 and my 2 channel # problem solved but still remote notification is not working and when I press "0" for revert DN instead of dialing revert DN is goes to prompt again. What I need to check? Thanks,

Hi, I have meridian mail rls 13 voicemail with 20 channel. Remote notification stop working. Also in 2 channels # not working. If I press Rst button on MMP40 card, is it will fix the problem? Also pressing Rst button on MMP40 will cause any data (mailboxes, greeting etc) lost? Thanks

Do I need to keep ACD printer for report TTY port active? I am not printing any ACD report. However we are using ACD. I want to use this ACD TTY port for remote modem. I have option 81C PBX and Meridian Mail. If I use this TTY port for ACD Port for remote modem is it effect anything? Thanks,

Hi,I have Meridian option 81C, release 24 PBX. Is it possible to install i2002 internet phone? If yes what I need to do? Thanks,