Search results for query: *

Did check ebay - no power ribbon - may have to get straight from toshiba. I am going to check. I have nothing but an external monitor hooked up currently - the system is open and stripped - no sound, no beeps, no video on external. I am also contacting the company I received the board from...

Anyone know where to get the power ribbon cable from the power button to the mb?

Tried the memory in both slots - nothing. How does the power button work on these units? Could I have a short in the ribbon from the power module to the motherboard letting the fan for the cpu and power light come on, but essentially not telling the board to come on. I have never seen it...

Ok - Seems the bios battery is soldered, but putting out the correct voltage. I connected an external monitor - nothing. I have the unit apart with a CPU on the board, no keyboard, no mouse, no memory, no battery, no cd, no wi-fi card, no modem card, no speakers attached. Still no video on...

Not sure on the battery to the Mobo? I will check. The battery was completely dead when I started and would not power on the unit - after replacing the motherboard, I left it pluged in charging even though I could not start it. The battery will not power the unit - still no post no beeps. I...

I have a toshiba a100 laptop that will not boot. When I press the power button the power light comes on and the battery charge light comes on ( unit does charge ). Hard drive light comes on momentarily and the goes off. Not beep, no video, no post. Hold the power button 8 seconds laptop goes...

We have 7.1.1 software on this box and x50w unlimited. It does not have that option. Could that be the software version? Since they have an end of life 10/09 they want us to upgrade at over 800.00. Now their software will limit you to 1 ip address going out if you do not have live security...

Anyone have an idea how to do this on a firebox edge. I don't think you can set trusted hosts and get around enforcing outbound authentication and still get access remotely to your internal servers on the trusted network.

I have a firebox x edge setup to require local firebox authentication to allow access to the Internet. Everyone has a password that needs access and it all works fine. However, I cannot access any computers remotely using any type remote access software (logmein, etc.) because the machine does...

That was it. I built the target line and then as soon as I set the line to answer, it worked fine. Thanks for your help.

The digits are correct for everything else we do with direct dial numbers to certain phones. It seems the CallPilot gets sent that 2840 every time from the system. Is there a way to work it out? My confusion is if I call the system in a normal world, what is getting passed to CallPilot...

It has something to do with the fact we receive 4 digits in for our DID numbers I think. The log in CallPilot shows an error about there being no extension 2840, which are the last 4 digits of our main number that I want AA to pick up on. Don't know what to correct.

I have AA running on a CallPilot 100 connected to a MICS 0x32. I have unchecked the "enable general mailbox delivery" and have gotten to the following problem. When I call the main number I get "The person you have called is not available" and then the recording I did for the CCR Tree number 1...

I am trying to create a shared calendar for use on SBS 2003 Exchange. When I access the remote web interface and go into Outlook, I have no problem. When I go to Pulic Folders and right click to create a new folder, I can enter the name and then try to select Appointments as the "Folder...

I found the issue. I had to create an "any" policy for the two networks - incoming from one to the other and vice-versa. I don't know what in particular is being blocked and Watchguard does not know either, but it works now. Found I also had to setup a policy to allow citrix through also...

I have a firebox core 1000 and an edge x55e with a manual vpn setup between two sites. Ping works fine to any device and VNC can even be used to control computers across link, so that part is up and fine. I have two other issues. One I cannot access any windows server on the x1000 side, I...

No encryption key saved, but the entire hard drive is intact and working - except for the fact that it will not boot.

I have a hard drive that will no longer boot. However, it is available as a slave drive. I have replaced the drive and reloaded the operating system, programs, etc, on the new drive. The problem is the user encrypted all the files in their My Documents directory so they cannot be moved. I...

Can't see the trees for the forrest. I have a 2003 domain server running dns. Let's say the internal zone is mylan.org. Our mail server is hosted offsite and is mail.mylan.org. All my outlook users get an error because Outlook hits the internal DNS server first and does not know how to...

I finally worked this out: Follow these instructions in step One: (Don't worry about uninstalling TCPIP.) http://support.microsoft.com/default.aspx?scid=kb;en-us;810979. I removed WAN Miniport (IP) and WAN Miniport (pptp) No need to test in the last step - still did not work. Follow these...