I'm trying to implement inbound authentication proxy on a 827 H router (IOS 12.3(6a) - IP/Firewall/IPSec 3DES PLUS).
However the global config command "ip auth-proxy" is not recognised or listed in command help.
Is this feature available on this router platform or IOS release?
Thanks in...
gman10,
PIX fixup is related to advance protocol handling. This helps certain protocol that have problems operating with the basic idea of the PIX's Adaptive Security Algorithm (i.e. Allow all outbound connections unless explicitly denied and deny all inbound connections unless explicitly...
Has anybody been able to implement the DirExport Tool from the Clearswift website?
I have been trying to export distribution lists from Exchage 5.5, with no success.
I either end up with an empty list or a small progress dialoge box apears stating "exporting mailboxes" (with the names...
Similar Scenario!
However, "Forwarders are disable, as this is a root server".
This can be fixed by removing the "." zone fromt the console and rebooting. Then forwarder can be added.
Just wondering if this is a good idea, and has any kind of implications?
Regards...
Sounds like connection properties in Internet Explorer.
Go to Tools> Internet Options > Connections, and check that you properties are setup correctly. You could select "Never dial a connection", whilst doing development work.
Regards,
Irregular
I’ve been trying to set-up a VPN (3.5 Client -> PIX 515 6.1(2)) for the last couple of weeks. Config follows.
I finally have it to the stage where the client is connecting fine, with the connection status statistics showing tunnel connections to both the PIX’s public address and my internal...
needshelp,
Nearly right mate!
The IP address and the subnet mask you have chosen are fine.
This will give you a range of 254 address (192.168.50.1 to 192.168.50.254).
However, your Default gateway and IP address are the same. This is never correct.
You should allocate one of the IPs in the...
Hi,
I’m trying to configure a CP 4.1 (SP4) NT box to do site-to-site VPN with a none-Checkpoint Firewall (SonicWall). I want to use IKE with DES and SHA1.
I’m currently defining my network objects, with the non-checkpoint box as a gateway without VPN-1/Firewall installed. However, under the...
Dmasch,
It could be a DC, BDC or Stand-alone. I think Microsoft don't recommend putting the License on any kind of DC.
However the plot thickens.
As it likely that both the connecting clients are to be Win2K professional or WinXP Pro boxs (And these clients get "free" CALs), maybe...
Hi,
We are planning to install terminal services on Win2K server, for 2 remote users. The TS will be a stand-alone/member server of an NT 4 domain.
I know I will need a Licensing Sevice running somewhere, to enable the Terminal Services CALs.
Although Microsoft do not recommend it, is it...
OK, I could see this being one of two things - Both concerning your connection from the PIX to the DSL box. If the link light is not on, your not gonna get anywhere.
Firstly are you using the right kind of cable? (Straight through or cross-over). I would check the docs provided by your ISP...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.