We have customer who is running on SIP trunk. Right now they are using codec G729. But I want to know how can we change this codec from G729 to G711? What licenses they require? System is 3300 CXi and version is 8.0.8.8.
@KWBmitel: Thanks for quick response. I think that way as well. We are going to do that, cause I tried once before and I was stuck in the process. Anyway I need to learn one day how to do upgrade perfectly.
@KWBmite: I havent got NSU connected to system, so I dont need to worrie about that.
@Supernova: Can I straight away upgrade system to 4.0? or Do I need to first upgrade it to 9.0 and then to 4.0 and then to 4.1 or 4.2?
@KWBmitel: Controller is CXi and I am not sure where to find the memory size, but if its under the System hardware compute cards and in that one option says memory size is 268435456. Is it the memory size you are asking?
@dryaquaman: I tried running the application under administrative right...
can anyone tell me the procedure to upgrade to rel4.1. I think its 7.1 to 8.x then to 9.x then to 10.X and then to 4.1. Is it correct? or something else?
I have installed the 5550 IP Console Application (3.1.1.10) on a Windows 7 pro box and 99% of it works just fine. The only thing that doesn't work, of all things, is that the Menu bar is nonexistent so I can't build BLF list. Controller's software version is 7.1. I tried running in XP...
Sorry Kwbmitel. It was mistake. I wanted to start new thread and I posted that question here. After realising that I have done it wrong, I have started new thread immidiately. Thanks.
Hi everyone!!! I am going to get one installation of 3300. Customer wants to use SIP trunks. Any suggestion for SIP trunk programming and thing I need to take care about SIP trunks? Thanks for help..
Hi everyone!!! I am going to get one installation of 3300. Customer wants to use SIP trunks. Any suggestion for SIP trunk programming and thing I need to take care about SIP trunks? Thanks for help.
Thanks wireman50 for your reply.
I spoke to Mitel engineer and they advise me to change the BRI card. I changed it and yet I havent received any problem from the site. One more thing I want to make sure is in the Network synchronization form how many clock source we should use for BRI service? I...
Sorry I didnt reply you. I was away for four days and just arrived in the office. If its the line then how it works for 10-15 days and then suddenly stops working? Please let me know about that. Thanks.
Sorry for not replying you Kwbmitel, I couldnt go to the site. I just went there today. I found this error.
It contain floods of the following logs just before the reboot:
3713 ERROR 2011/03/18 04:17:09 CQuadBriFramerHal::ReadDataFromHDLC Software QuadBriFramerHal.cpp(622)
Message to receive...
This is independent network and nothing is connected. I just used CXi's POE switch. There is nothing connected to it. Customer's data network is seperate and phone network is seperate.
Phones are working now.. But system freezes itself some times like it happened on last week monday and friday. I cant log on to the esm. Phones gets stuck on the continuing boot up after getting ip from DHCP. I have to resart system manually. After that sometimes system might come up or might...
@kwbmitel:
It performs all the boot sequence you mentioned. The only difference is it comes up with VLAN 1 priority 6. Because I have set it to 1. Except that it performs all the steps you mentioned.
Plug in phone
Phone starts boot sequence
phone says vlan none priority none
phone does DHCP...
I dont know why it doesnt see the server. Because DHCP option is set up in CXi and it shouldn't happen. Their DATA and Voice are on different networks now. So there is no conflict anymore. Thank for quick reply KWBMITEL.
I got Call from that customer again and now it is different problem it says DHCP: Discovery. I dont know whats going on there. It worked fine for a week and it came up with different problem. Its something different then what I was thinking. Any help?
I disconnected that patch lead and restore the back up.. That solved problem.. It was getting ip from the CXi but then it was getting stuck on continuing bootup. I was able to see LLDP on the phones.. But I thought that the cable connected to another dhcp was blocking phones to boot up. Has...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.