Search results for query: *

Hi Scott For basic connectivity all you will need to configure on the switch will be the IP address, subnet mask and gateway IP address. Instructions should come with your switch on doing this. Not sure about the model of switch you are looking at I dont use linksys Nogs

Hi Cyberspace Sorry I dont have experience with any of the models you quoted, however Linksys kit is v reliable I have a router which has worked without a blip for years now. Of the 3 manufacturers the only 1 I try to avoid is D-Link their after sales service is diabolical, trying to place a...

Avtivee What are you using as a DHCP server? Nogs

Was the wired NIC enabled? I have seen some laptops disable the wired NIC while wireless is in use and then unless you reboot or specify that wired be used it remains disabled. Nogs

Hi Choppsy I would say that looks fine, if after adding new users further down the line you notice performance issues and the percentage of broadcasts has escalated you may need to then divide your broadcast domain by adding a router or implementing VLANs. For now though I see no problems with...

Chopsy Have you tried connecting upto the switches locally via a console/management port and checking the IP cfg that way. If you do have speed issues check link speeds and duplex settings while your there as well - the LED indicators should tell you port connection details. HTH Nogs

Hi Lundah Thanks V Much!! What is the theory behind VLANS?? Is this something that allows 2 subnets over 1 LAN? Will I have to setup each switch with 2 Vlans (192.168.2.0 + 192.168.20.0)? Does anyone have any FAQs I can take a look at?

Hi All Can anyone advice me, currently Im using a class C network 192.168.2.0 255.255.255.0, the gateway is 192.168.2.248. Running out of addresses want to add a new subnet of 192.168.20.0/24. From the new network I want to see a server 192.168.2.10 on the "old" network on port 23 only - all...

Lloydsev I have tried the drive in another systems and it works fine Nogs

Just tried the brand new drive in my PC works fine - I am using it cable select though and secondary master on the other PC

I have tried 2 dvd roms - one is brand new, both act the same

Your right Lloydsev, it must be at windows level as device manager is picking it up. Still cant see the drive on bootup though or in DOS.

Hi Lloydsev, I will take alook at the software but feel that the issue is possibly at bios level; If all you want to do is upgrade to XP, you can do this by booting with the XP disk in the drive.. I would do this but cant see the cd drive to boot on the xp disk - hence my problem Nogs

Hi ceh4702 Might try to get a copy of power dvd and see if you can read it with that software. IS this freeware, where is the best place to get it?? Might try looking at the device in windows and see if you have any kind of errors from it or if it shows up at all. This could be a windows...

I am trying to access dvd drive to browse its contents. From both Windows and DOS it isnt accessible, in device manager the manufacturer and type are displayed. I have tried changing the BIOS to AUTO detect, I have removed it from device manager and it has been re-installed. I have also tried...

Hi All Having followed Cacrolls instructions I now get asked for a password when trying to access the xp pro pcs share for the following device: \\PCNAME\IPC$ Any ideas anyone????

Hi harris79 Im not logging on woth the same username, I have different password as well. Thanks Nogs

Upgrading from nt4 to xp pro is possible, check you have ample ram,cpu etc...

I have a shared folder on and Xp pro PC which is part of a workgroup and when accessing it from another xp pro pc or a win 9x pc I am asked for a password? I have Simple file sharing enabled and have checked the usual connectivity issues. Any ideas Nogs??

Thanks for that Tony I will try it, I thought there was a template file, but was looking for Normal.doc!!! Hope this works thanks Nogs