Search results for query: *

From what I can find 200M (655FT) max. after the Demarc. Hope that helps, Bobby D

This is how the systems looks now, can I add three 016 MLX cards to slot 15, 16, & 17? If not three any? Slot # 0: CPU R7 Slot # 1: 408 Slot # 2: DS1 Slot # 3: 016 MLX Slot # 4: 016 MLX Slot # 5: 008 MLX Slot # 6: 016 MLX-U Slot # 7: MM VM Slot # 8: 016 MLX Slot # 9: 016 MLX Slot #...

FIXXXXXXED !!! ok, it looks like the CLEC (One Communications) messed up and set the DID's 1 number off. took 3 days for them to catch it but everything is working just fine. Thank you very much for your posts, Bobby D

Prior to adding DID service, the incoming calls were comming in on the same ports of the FT1, 17-21. i have a call in to 1comm but they don't seem to be that on top of it. I will be there at 6:00 AM EST in the morning, other than the CLEC should I check anything on the ACS that I have not check...

First, Thank you Jim: All the DID are Ringing one ext off. DID 836 is Ringing ext 35 DID 835 is Ringing ext 34 DID 825 in Ringing ext 24 I can call each intercom with no problems from each other. from Ext. 36 I called many intercoms and they all worked fine. NOTE: they have 2 Ext that need...

I called from land line same thing happend. Should I be looking at the LEC? Maybe they are doing something wrong? It seems easy to set up mapping and set the DID setting under lines for each channel of the T1 but I am lost. they are using line 17 - 21. I have attached a BMP of the line 17 and...

I have a customer with a T1/DID i set up the LEC to send the last 3 Digits 800 - 849 and i mapped them to each ext. with the first 11 going to the Ext 10 (800 - 810 mapped to Ext. 10) then each of the other DID's are mapped in order - DID 811 to Ext. 11 DID 812 to Ext. 12 DID 813 to Ext. 13 DID...

I am running xp and using MS office 2003 - first i dont have problem getting mail only sending it and sending sometimes works. When i send mail (send/Rec) in the lower right corner it says sending 1 of 3, but i know i only have 2 emails in my out box, then i get the error message 0x80042109 -...

To jerryreeve: Yes, the 34 trunks will be turn in to 24 DID's and then a small 4 line Analong hunt group as backup. the problem in the customer does not want to change the trunking day one. trust me, I have been over and over why DID's/cutting the number of trunks or even install ISDN/PRI. But...

Dude, cutdown on the Coffee

Thanks, but 1 more Q... "PoolA and are E&M with wink start / auto answer" When set to Auto answer, the pool(s) placed that are placed on the Att. (CAP), will ring as a loop start trunk?

I am Replacing a Key system with a MICS 6.1. In the current telephone system, the 34 trunks are all analog loop start, but are comming in via a 2 T1's and that hit the LEC's channelbank and then to the customers Demarc. The customer asked if the trunks could be installed as T1's but be used in...

I have a friend that is deciding between an Option 11C and a MICS 6.1. The vendor pushing the Option 11C told my friend two things I am not sure of: 1. DID’s (Target Lines) placed on multiple sets (say 10 or 15) as a hunt group, will not ring on all the sets. Exmpl.: Set 101 Btn. 1 = Target...

I have one extn. the will only send calls to audix if "send calls" is on, in an idle state, calls after 4 ring will go the the Attn.. I have check this station to others that go to Audix after 4 rings, and they seem to be the same... I'm lost. Thanks for any help you can give, B~

Right now my system (in a school) is a Prologix w/ Definity Audix, Where the only Admin interface I have, is a terminal (CLI-Command Line Interface). I am not familiar ASA at all. What releases of ASA are available? What will work with Windows 2000? Where can I get a copy? How much does it...

I WISH I had ASA, where can i get a copy and will it run on win 2000?

I need to change all the ext. that are on a 6424D and its expansion Mod. the person using the phone would like all the ext.'s, starting at Button # 9 on her phone and continuing on the Exspantion Mod.to be changed so they are in order. see below: current Station 230 Btn. # 09 200 Btn. # 10 201...

...and when I got the door phones connected (after testing the Ext.’s with a 7316) I could not get them to ring a single set. I went in to feature 9*4 and the system found the door phones (230 & 231) and then I set the rings to 5 and the page to none. But the customer wants all the phones to be...

I'm am sure this is an easy thing to do in excel, but I can't seem to find the right way of using the Fill feature in Excel. I want to know how to drag three cells that have the following in them: 001A 001B 001C so the next cell below will have 001D then below that cell it will go...

i have most of the Norstar install giude PDF's but i am missing the 3x8 installer and programe giude, i did find the programe record, but can't find this one. If you can help... THANKS B~