Search results for query: *

905 and so on are the end digits of the phone numbers. We have destination code 9 or 8 doesn't really matter in this case and pool shouldn't either. Pool A is used for other tests. :)

Just" another configuration issue. ;o) Setup is the following, BCM50 Rls 3, 3 analog lines and 3 sets (there are 2 more IP and 2 digital ones as well but leave them out for now). We have: Lines 61, 62, 63 DNs 234, 235, 236 Public ... 905, 915, 916 We set up Pool B for those 3 lines. Pool B...

Hi guys, is it possible to replace the ringtone with MoH? We tried to set it up using CC: 1. Greeting 2. Transfer We hear a short part of the MoH (< 1 sec) and then the phone rings and caller gets the ringtone. We want caller never to hear the ringtone - go it working on Cisco System where...

Hm, BCM was powered down over the weekend and after restarting and connecting up the phones again, everything is fine. Hm, I did some restarts last week and they never helped ... weird ...

Registration is Enabled and NEtmask and Gateway IPs are correct as well.

DHCP is set to Enable - IP phones only. Tried static IPs as well, still not happening.

Ok, problem is that thos phones keep saying that the server is unreachable. BCM 4.0 is just an out of the box unit, Rls 4. Cold reset has been done already. (No chance of Level 1 reset with a 400, is there?) Tested a softphone as well - no luck. Did a direct test - IP phone directly into LAN...

Any idea for a test config or advise on how to configure Cisco 3560 switches for use with BCM (PCs will plug into phones). I need to know QoS settings and any other special settings for Nortel equipment. The PCs will be in the data VLAN and the phones will be in a Voice VLAN.

I heard that the 1110 is BCM50-only - does this apply to the rest of the 1100-series? Can find any docs on that.

Was going in the wrong directions there. BRI doesn't matter, you got 12 digital stations in the BCM and get another 32 with the DSM which results in the given limit for the BCM50 > 44 digital stations.

Hi just a question rgarding the BCM50b. If only the 2 internal BRI trunks are to be used for lines, can we put 2 x 32DSM's into expansion chassis to support a total of 76 digital extensions?

The files are fine.

Hi guys, got a problem with a BCM 400 Rls 4, all latest patches are installed. When playing MusicOnHold or listen to custom messages (AA or CC) it plays normal - stops - suddenly starts to play the file with immense speed (highpitched sound) then playing it normal for a while and begins again...

Hi guys, got different problems here while trying to set up Reporting for Contact Center. FIrst I used to get errors that SQL Server 2005 wasn't install, it was but I uninstalled and reinstalled it. RCC installation finished - reboot and now running the RCC Database Installer Utility (DBI) and...

Hi guys, found this thread - well the analog loop is set up pretty quick - but is there any way to try this with a BRI module or with a BCM50b?

Yes it is indeed, gonna try Guarded again. Thanks guys.

Hi guys, got an analogue line set up to be answered by Auto Attendend (problem's the same when using Contact Center). When AA is answering and the caller hangs up while AA is talking the line is not released for another 2,5 to 4 minutes. As far as I read it the trunk mode should be changed to...

Looks ok, .. just set up autoattendant and a proper CCR tree for faxes and it works. Seems like something is not right with express messaging ...

Nope, checked that already - went throught the whole express messaging setup again - any iea what I could test to narrow down the problem?

That's the way it's set up already - still not getting throught to VM - just getting a triple tone.