Search results for query: *

We found the part number: TSR 432 183 which seems like a stright cable. TELEC3

What is the part number for the cable connecting the new NIU2/12 and AAU/2 for SNMP, it's an RJ45 at both ends, can't find the cable in TSW SP7 docs????!!!!XXXX TELEC3

I’m having problems with ACL-OCS integration seems like the ACL receives the messages from OCS, but nothing happens after that, I’m running ACL 1.0 SP2. During the ACL setup we are asked for the Domain, UserName and PsssWord, I used the same domain username and password of the widows 2008...

When deploying Mobile Extension let's say a user has 3 extensions in the MX-ONE, a Generic remote extension associated with he's cell phone, an IP phone on he's desk and a VoIP IP client on he's cell phone using AMC+, what is the best deployment architecture: 1. 3 separate extension numbers...

*67 is the equivalent in the US for cell phone am not sure how to add the *, or even if that will work on the PRI. TELEC3

How can I shield CIL using RODDI: ADC = ? which bit? TELEC3

I need to allow caller ID internally but block caller ID for external call over a PRI, except when calling 911 on that PRI where i want to send ANI information or caller ID. TELEC3

Which MX-ONE version? TELEC3

MX-ONE TSW SP7 ( BC13 SP7) same HW as MD110 and support IP terminals and IP networking, MX-ONE TSE supports all the above and SIP requires ESY and LSU-E or MGW HW. TELEC3

According to the 4.0 documentation it is: From Operational Directions, ME and RE over SIP 142/154 31-ANF 901 14 "Initiate the directory number for the remote extension number_initiate -numbertype ex -number 479 MOBILE AND REMOTE EXTENSION OVER SIP 17 142/154 31-ANF 901 14 Uen B 2009-12-07 •...

TSE 4.0 incoming calls over SIP route are wroking fine but can not get MEX to work, did any one try MEX over SIP route?if so please post needed commands and route configuration please. TELEC3

MX-One 4.0 with MGU in Lite, when getting to the restart phase of the RVA configuration method I get a time out, any ideas? MDSH> new_voice_prompt /myRVA/message001.wav /eri_egx_root/nfs_root/rva/new/message001.wav Success! Please note that in order to activate the new prompts...

Yes, a lot of changes in the commands structure but it is the same, from the CMG side it exactly the same, from the MX-One just the new MGU and same data base as in a working TSE 3.2 environment TELEC3

TSE 4.0 with Now SP7, when programming an absent code on an IP extension, and calling that extension from another IP extension, the call is diverted to the NOW console correctly but it’s missing the phone number and the absent code (message diversion information), it looks like the caller called...

Whosrdaddy is right, I was thinking IPLU. TELEC3

just copy the files using a flash card reader, that is the fastest way. TELEC3

V4 is nice, one server controls multiple gateways, new hardware the Compact SMH and the new MGU board, split installation process make it more practical to upgrade large TSE sites, 10 digit number extension, new CTI interfaces with SDK kits, new MTS and MP pages have a more professional look...

What do you mean H323 works ok? is there any RTP resources consumed in H323? TELEC3

OK seems like there are two RTP resources used just for setting up the call, a quick test with two MX-One TSE nodes connected together through SIP routes, the SIP phones always receiving the call consumes two IP resources, the SIP extension initiating the call does not consume any resources from...

What's a 3 party service? TELEC3