Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MEX with SIP route

Status
Not open for further replies.

TeleLion

Technical User
Jan 4, 2006
326
US
TSE 4.0 incoming calls over SIP route are wroking fine but can not get MEX to work, did any one try MEX over SIP route?if so please post needed commands and route configuration please.

TELEC3
 
AFAIK,
MEX is only supported on ISDN public routes.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
According to the 4.0 documentation it is:
From Operational Directions, ME and RE over SIP
142/154 31-ANF 901 14

"Initiate the directory number for the remote extension
number_initiate -numbertype ex -number 479
MOBILE AND REMOTE EXTENSION OVER SIP
17 142/154 31-ANF 901 14 Uen B 2009-12-07
• Initiate the remote extension
GEDII:DIR=479,LIM=3,CSP=1;
IPEXI:DIR=479,AUTREG= YES ,TERMID=
"479@c-253.btrunk.se" ,URI=
"ROU:77;remote-number=719001234567" ;
• Initiate the number conversion data
number_conversion_initiate -entry 00 719001234567 \
-conversiontype 6, -truncate 14 , -pre 479

TELEC3
 
oh I see,

new feature (didn't know that ;) ).

I don't have any sip routes at the moment so I can't test this. Try to find some help on the Aastra forums.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
You have posted the config :)

What is your problem? At call from the mobile the dialed number need to be prefixed with the R1 number as normal. That is the only thing missing in the config. Then you use a "normal" SIP-trunk to you provider.

Cheers
Fredrik
 
Hi Telelion,
While MX-ONE version 4.0 is just released, and only commercially available in a limited number of markets, I assume that you are part of the Field Trial Project organisation.
How come you post questions like these in this forum.
Why don't you simply ask the Aastra engineers what to do?


















































 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top