This is one of those questions that requires a couple of hundred questions.
But generally routers are sized basd on bandwidth requirements. VOIP is going to use some of that bandwidth just like other ip based applications. Example 3600 runs between 40 and 120 kpps assuming you keep serialization...
Probably one of the best things that you can do is to purchase smartnet on one of your devices. That will give you access to versions of ios for the device.
As far as Flash and ram goes they are cheap enough go to kg2.com and order flash 16mb and ram 16mb when you do ask Kelly for a rom bios...
Yo ciscorat do this
Parts: 1 back to back cable (basically a serial cable that is crossed)
Personally I prefer the modular cables available from kg2.com. The are reconfigurable without plugging and unplugging from the serial ports of the router.
Well lets get started.
Most any cisco router...
Your problem proabably is due to windows authentication settings.
got to the adapters
Security tab: Configure handshake and authentication methods. Networking select the type of tunel dont allow for auto.
Those are the primaries if that doesn't work let me know.
2500 after break o/r 0x2142 <enter>
Initialize
<ctrl><c> for setup
en
conf t
config reg 0x2102
copy start ru (if you need the previous config call me nosey)
set your passwords
wr (to save)
(Shoop) sound made by putting boots on.
Ok so VTP as you know is a layer 2 trunking protocol that is advertised on all trunk ports via 802.1q. Propagation is controlled by VTP domains. Messages have to be the same version. VTP members must be locally adjacent.
So how do get from one VLAN to...
Try this'
Personall I prefer tera term it's frreee has ssh and works great.
So login to router a from user (mode thats the one with > or # but not config#) type telnet <ip.add.re.ss> yes please insert a valid ip address.
ping trace route what ever in tera term highlight the results click edit...
Whewwww that was a smoker. The prevouos posters are probably more correct debug ip rip to see if your getting updates. If router a is connected to router b the best rout is going to be the directly connected interface.
configuration
...Router one advertising a route for 192.168.1.0 We...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.