Search results for query: *

Thanks for you quick reply! Do I have to use a specific "User" CD with this 3.0 580 "admin" CD? Could I trouble you for a link to it? Thanks again, Philip

Hope you can help, we have an Avaya IP403DT with POTS expansion units and we seem to have a compatability problem with manager and the installed firmware. Basically if we do a "merge" the config ends up corrupted. The Maintenance CDs seem to have diasapeared from the Avaya site, so can anyone...

Hi Tom, thanks for your answer. I went back to a working version of the config and had another go at the LCR and it seems to work now. I looked at the "not working" config and could not see a short code with the "force account code" box ticked. In the "working" version I have set the "Main...

Hi, I hope someone can assist. We have a 403 system with ISDN lines. We also have an O2 mobile contract where we don't use all the minutes and 02 to 02 calls are free. I found a "Tegular" device that accepts the SIM card and acts like another analogue line. So I set up a line group and used a...

Hi amriddle01 - you are quite right, I was abbreviating. the actual number is 3.0.578 Downloaded from http://support.avaya.com/japple/css/japple?PAGE=ProductArea&temp.productID=129487&temp.bucketID=108025&temp.releaseID=275742&x=10&y=6 Hi Escorthosis - Thanks for your help - I will try to get...

Hopefully a simple question from a simple user - I have upgraded our 403DT based system from 2.1.14 to 3.0DT which I understand is the last of the line for the DT systems. I can only download the 3.0DT Admin maint release from the Ayaya website (there just does not seem to be any other version...

I am supplying a couple of specialist panel PCs based on an ALI chipset. Aparently, this chipset is not recognised in XP SP2, causing installation to hang. The "workaround" offered by the PC manufacturer is to install XP original, install drivers and apply SP2. This we have done (using our "for...

Hi IPGuru - thanks for taking the time to reply - I really appreciate it. I know I am probably doing something stupid, but as yet I don't have the experience to spot it. In the "Manager" view I can see the "Lines" box and under that there are 8 lines (strangely the list starts with line 8)...

I hope somebody can give me a bit of help. My company is moving shortly and we are taking the oportunity to upgrade our phone system. We have got an IP 403 Office with a 4 port ISDN2 card in slot B and I have just fitted a 4 port analogue card in slot A (we don't have any ISDN lines at the...

And it is a PIG if you don't read the notes and just upgrade insing the Wizard. My 403 continually rebooted after I tried to go from 2.1.27 to 2.1.31 without going via 2.99 and it has just cost me several hours to put it back to how it was. What a performance! This is a MUST READ...