Search results for query: *

This is an update: I ordered an 8DLCA card, which fixed the problem. I was able to hook up my phones and extensions. I think the LTA card was defective or I had blown something in it. The next step is button programming. I've been able to do some local DSS programming through the phones. I am...

Currently the LTA does not have a 100ms flashing green light and instead has a solid red and a 1s flashing green. I tried to default the system before, which essentially got it stuck in "Initializing" for about a whole day, so I'm hesitant to try that again. I will probably get an 8DLCA off of ebay.

Yes, 4x 12-button DT300 phones. As in digital card, do you mean either an 8DLCA or a 16DLCA to replace the LTA blade, or do you mean a whole new CP00 card?

This procedure did not work. It still has the same "Initialize" message on the phone and the LED patterns on both the LTA card and the main Control card. Is there any other procedures I can perform to try to resolve this?

Ok! I was able to enter into the Web UI. How can I get past the "Initialize" on the station? The LEDs on the Main Control Blade blinks LED1= 1s flashing, LED2= on, LED3-5= off. On the CD-LTA, the LEDs are LED1= on, LED2= 1s flashing. According to the hardware manual, it says that the "assignment...

So I was able to get the system out of the 'Initializing" phase. However, it has an unusual LED pattern now. It is LED1 blinking, LED2 on, LED3-5 off. This indication is nowhere in the manual. Do you know what this means? I believe the system is wired right. I made a custom cable and followed...

I am using Port CN101 for the digital phones. Do I need to configure it in programming for the system to recognize the port as Stations 101-108? Also, how can I get past the "Initializing" stage on the CD-CP00? This is my main issue right now as this impacts the other card and I cannot get...

The previous owner of this system used this same card for his phones (the same ones that came with this system- I bought a package). Did his phone company configure it differently? Also, do you have a suggestion for getting past the initializing stage on the Control card itself? And once I do...

Hello, I am a hobbyist and I love to work on phone systems. I picked up this Univerge phone system off of ebay. It came with 4 12-button phones and a chassis with the CD-CP00, CD-LTA, and CD-4COTB (in that order). When I first plugged the system in and tried to set it up, the phones were stuck...

Oh ok. Thank you!

Hello! This is my first post. I have just installed an M7324 phone with a CAP 48. I am using a 6-conductor telephone cord for both connections. The phone and CAP are on a 6x16 Non-DS DR2 System. The phone is working, but the CAP is not. Is this unit compatible? Please help me out if you have...