Hello,
I am a hobbyist and I love to work on phone systems. I picked up this Univerge phone system off of ebay. It came with 4 12-button phones and a chassis with the CD-CP00, CD-LTA, and CD-4COTB (in that order). When I first plugged the system in and tried to set it up, the phones were stuck at "Initialize" on the display screen. I think this is because somehow, the programming was erased and so now the CD-LTA blade needs to be reconfigured to be set as Stations 1-8 (just a hypothesis- I could be wrong).
I played around with it and eventually tried factory resetting it. I powered it down, held down the Load SW for 10 seconds, then let go. Now, LED 2 is ON, which according to the manual, means it is "Initializing". The other blades also show that the system is "Initializing". It has been doing this for about 10+ minutes. Obviously, there is no way it can be "Initializing" for this long. Did I skip a step or is it waiting on me to do something? I reached out to the guy on ebay, but I think he was an end-user rather than a tech, so I doubt he will have any advice on what to do.
I was unable to get PC Pro working because I believe my login when trying to set up a new account was incorrect, which prompted me to reset the system. If anyone has any advice or a solution, please let me know. I attached a photo to the post, but since this is my first post, I am not sure if it uploaded correctly.
Any help is appreciated!
I am a hobbyist and I love to work on phone systems. I picked up this Univerge phone system off of ebay. It came with 4 12-button phones and a chassis with the CD-CP00, CD-LTA, and CD-4COTB (in that order). When I first plugged the system in and tried to set it up, the phones were stuck at "Initialize" on the display screen. I think this is because somehow, the programming was erased and so now the CD-LTA blade needs to be reconfigured to be set as Stations 1-8 (just a hypothesis- I could be wrong).
I played around with it and eventually tried factory resetting it. I powered it down, held down the Load SW for 10 seconds, then let go. Now, LED 2 is ON, which according to the manual, means it is "Initializing". The other blades also show that the system is "Initializing". It has been doing this for about 10+ minutes. Obviously, there is no way it can be "Initializing" for this long. Did I skip a step or is it waiting on me to do something? I reached out to the guy on ebay, but I think he was an end-user rather than a tech, so I doubt he will have any advice on what to do.
I was unable to get PC Pro working because I believe my login when trying to set up a new account was incorrect, which prompted me to reset the system. If anyone has any advice or a solution, please let me know. I attached a photo to the post, but since this is my first post, I am not sure if it uploaded correctly.
Any help is appreciated!