Search results for query: *

Sounds like the problem is with the registration relay sticking, it's easily fixed... you'll find a repair kit and instructional video here :-) http://www.fixyourownprinter.com/kkb1.html

You need a seperation Pad Kit hp part no. RY7-5077-000CN then take case off take out pickup roller replace all parts it pretty obviuos once main roller is out reassemble and behold single sheet printing.

I had this many moons ago drive worked fine but couldnt open it unless done manually with paper clip through hole in front. gets so annoying finding paper clips u will buy a new drive.

The amount of memory in printer should be on self test page. 1. Press On Line to take the printer OFF LINE. 2. Press Menu until TEST MENU appears on the printer panel. 3. Press Item until SELF TEST appears on the panel. 4. Press Enter to print a self test page. 5. Press On Line to return the...

Try deleting the nic from the device manager from the control panel. Do a scan for hardware changes. It should find it and reinstall the latest driver. IF that doesn't work, I would shut down the pc, pull out the NIC, if it's an add in card, and restart the computer. Then reinstall nic from...

nvidia drivers need installing after mandrake or mandriva is installed everything u need is on nvidia site drivers instructions the lot. http://www.nvidia.com/object/unix.html

Thanks Marty but i have already replaced this part as this fault was happening all the time. After replacement it worked for a couple of weeks. Now it does this intermitantly. So i reinstalled and cleaned everything i could find that looked like it needed cleaning and still it happens. Any other...

can anyone help this problem is close to one i have seen already i just need clarification. the last page keeps printing for ever. but sometimes it works then all of a sudden the last page will keep printing. fault history: 15:22,024.01 14:22,500.00 13:22,500.00 12:22,500.00 11:22,721.05...

I have the same problem. It was suggested I replace the accuator arm on the quick release guide, as it could be bouncing and causing a false reading. I replaced the whole guide. But still have the same problem.