Search results for query: *

Holy crap! It worked! In the assisted transfer box I input the 81XXXXXXX,,,,,, Then Short code 8N; Feature Flash Hook Telephone number N THANKS

Ok I have an issue I have been working with Avaya TS on and seem to be getting nowhere. My Customer has Centrex lines and would like them to perform an assisted transfer through the auto attendant and transfer the call off the system. I can get it to work manually through the phone but when I...

Thanks all customer fixed routing and now the voip trunks are up and the virtual license is active along with the unique host name.

The correct Primary server IP is set correctly in licensing. I do see both systems under manager solutions But I believe those Voip ports need to be in service so the server can see those licenses correct me if I'm wrong. Also each system should be able to ping each other. I have the customer...

Thanks I think there might be a problem with routing because the voip trunks are all out of service. Although I can ping both servers I can't ping them through system status on either server.

I just finished (so I thought)setting up a Virtual Server Edition system and installed the licenses. Since it was a first for me to setup a secondary server I was a bit confused on if the host name of the secondary server should be the same as the primary? I changed the name of the secondary...

I have maybe 6 power users. It's not used a lot I also monitor periodically when onex users are logged in Never seen more than 2 logged in. At 100 percent usage I'll see no one logged in. I also periodically would see people trying to login from outside. Since I changed the default port...

Happy Friday to all. I'm using a Virtual App Server in HyperV Version 10.2.02 One X is enabled and we use it off site occasionally along with Web Collaboration. Intermittently I have been getting 100 percent usage and a CPU exhausted message. When I first noticed it seemed to be 100 percent all...

I see 2 arrows pointing opposite directions like your not on the main screen.

This is how I got it to work. I used the new Default module. Note the new $CP0 entries in Moderator.

Hi does anyone know how I could get this module to work by dialing directly from outside? Thanks in advance.