Search results for query: *

I have a GDK-16 System connected to a BT featureline. I now need to dial 9-9 to get an outside line. is there any way i can programme the system to do this automatically ? Also, is it possible to divert calls from this system to another phone ( monole or landline) when not in the office ?

I guessed as much. Thanks for your help

One last question ( for the moment) I am trying to set up the system with a voice message for when the phone is not answered. Is this possible ? I've followed the instruction manual for the LDK-30D handset, and it will not let me do it. Thanks

woo hoo ... I have sorted it. The problem was my line out is on Line 4, not line 3 ( even though I only have one line into the unit) once I programmed it for Line 4 then the menu-3/xx/7 worked Thank you for your help. I may need it again !

Ok, well I have tried what you suggest, and I've tried all variations of the station numbers including changing around the DTK connections on the motherboard and the DTIB card. I still can only get 2 phones to ring though ! Is there a way I can put everything back to factory default and start...

Ok, well I followed the instructions and I have managed to get station 100 and 104 ringing together. However my 3rd line I cannot get to ring. It was on Station 101, and I have tried it on station 105 also to see if there was a difference. I have also tried a different phone. Any suggestions...

Just one questions before I follow your instructions. When you say "remove the programming" do you mean do a reset on the main board of the GDK-16 ?

it doesn't appear to be working. I've set the first 5 flex buttons ( stations 100 - 104 ) to "all ring" as per your instructions, but they are not ringing. Any suggestions ? Thanks

I followed your instruction, but they do not ring. I will try it again. Also, is there a way of programming the system/phones so they automatically dial for an outside line ? I have to dial 9 9 to get an outside line. Thanks

Do I have to set all 20 buttons to this sequence ? I have done it for stations 101 and 104 ( the two I want to ring) but they are still not ringing when an incoming call arrives.

I have one CO line into the building. I have a LKD30D on Station 100, a 2 off LKD-8S on Station 101 and 104. Incoming calls ring on Station 100 only. How do I programme it to ring on all 3 stations, and also enable me to pick up the call from any of the stations ? Also, if I only have one...

Here's my problem. I have a GDK-16 system fitted with 3 phones and all works well, apart from the 'noise' I hear on the calls. Apparently my customers and anyone else calling can hear me crystal clear, but I can hardly hear them for the noise on the line. The system is plugged into a standard...

I have followed your instructions, but I still cannot dial out ? all the phones are working, I have stations 100, 101 & 104. They can receive incoming calls, but I'm unable to dial out. My BT line requires a "9" to gain an outside line, Do I have to programme this in somewhere ? Thanks

I have the LDK-30D phone connected to DTK1 and it is registered on the handset as "Station 100" I am unable to get this to dial out, although I can receive incoming calls. I have also managed to connect a LKD-08S to DTK2 which comes up as "Station 101". I have connected a further 2 LDK-08S to...

Thanks. There are 4 wires in the BT cable, do I connect numbers 3 & 4 ( which are blue and red) and are there any polarity issues ?

Ok, I now have a LCOB2 Trunk card fitted in place of the STIB2 card. What wires from the BT socket connect to the LCOB2 ? Also, I have 3 LKD-8DS phones, do I connect one of these to DTK2 and the the other two to SLT1 and SLT2 on the main board ? or should I connect them to the DTIB or SLIB cards ?

Thank you for your help

It is an Analogue line

so how do I connect it to my BT featureline socket ?

Ok, so it was a silly question I guess after all