Hi guys
I have a Win2k8 R2 Rds server with virtual IP enabled per session.
I created a new dhcp scope for it
But the problem I'm faced with is as follows
when I run an ipconfig on the first session I get 192.168.10.6
And then when I do the same for terminal two (T2) I get 192.168.10.6...
You might have already checked this but, can you ensure they've selected the correct time zone in the date settings.
I've seen this have an effect on sending mail.
Thanks Markdmac
Port forwarding was my answer. I had a virtual servers option on the router. I added the internal address of my webserver
and now I can now share the internet.
Sorry for the delay but great thanks for pointing me in the right direction.
Just finished working on a site (http://unixplorestudios.no-ip.biz)with some flash menus. I edited it in both flash 8 & dreamweaver. everytime I did a preview in dreamweaver it ran perfectly well.
I noticed that in Firefox the site was able to properly display
A news ticker
google search
Flash...
I recently bought a website development magazine which came with a cd. I used one of the flash templates to develop my website.
It's a similar template used by http://www.plasticspider.co.uk/
I wanted to know how I can change the various tabs at the top for example like Home; Gigs etc
And is it...
Hi Markdmac
Sorry this still hasn't worked.
I use a belkin F5D7230-4 router which has a firewall and NAT capabilities. I went to the port forwarding properties on the router and and added my webserver's IP address.
I registered my Ip address with a Dns Service, not sure what happened but now...
Thanks markdmac
I've managed to setup the NAT. My second Nic is connected to a wireless router, how do I configure this to work.
I followed the wizard in remote access and routing and selected the second nic for the internal network.
I then connected my wireless router to it and then still cant...
hi guys
I've just registered my domain name with a free dns service and have provided my broadband Ip address.
I've also built a win2k3 domain controller which is connected to the internet.my problem arises when I try and plug a wireless router into the second network adapter, I realised that...
Hi Guys
I've got a similar problem. One of my workstations can access a page on my webserver. But the other workstation cannot it comes up with a page cannot be displayed.
Both workstations are similar in configuration (Win xp) what do I need to check.
I can also access the page from the...
Hi Guys
I'm new to terminal services. let me explain my scenario.
I've got a terminal server where users logon to access an application. the application works fine.The users click on a log off button to exit the application. but get a plain blue screen afterwards
I've advised them to do a...
does this happen on all pc's? If not that means it's workstation issue.Try uninstalling & reinstalling the ica citrix client.
Try it on another pc and see if you get the same results.
The remote computer disconnected the session because of an error in the licensing protocol - I've seen this error message especially when accessing Citrix applications. Not sure if it will apply in your case.
I normally go into the client pc's registry and delete the MS Licensing Key including...
I know this might sound silly, but have you ensured that the host xp pc's allow remote desktop connections.
That the users who are connecting to these xp boxes are members of the remote desktop users.
Can the xp workstations ping the pc's which they need to connect to?
What vpn client are you...
He could test the analog line by dialing say his mobile phone and see if it rings.Alternatively he could connect an analogue phone just to be sure that the line works.
Another thing which might prevent him from dialing out is if there are unread voice messages on the analogue line. Hope that...
Hi Guys
I'm experiencing quite a similar problem. I have a Win2k server which is connected to HBA then to a disk array. One morning I discovered that the D drive had dissappered.
At first I thought it was a problem with the Emulex fibre adapter on the server. I replaced this and also the fibre...
Hi Guys
Not sure if this is the right place to post this. I have a mind boggling situation happening at work.
My collegue usually transfers data from an XP workstation to an NT Server across a LAN. the file sizes range from 250MB to 1GB. these normally take about 5 minutes to copy across...
Thanks guys for you prompt responses. I'm reading up on SNMP to see how I could go about it.
I'll get back to you should I have more questions.
Once again thanks for your help.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.