Search results for query: *

Two RV082 behind 2 DSL modems will work, can you configure your DSL routers into 'bridge mode'? I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

If the remotes see the main office as 192.168.0.0/16 then all 192.168.x.x traffic will go to the main office, not just 192.168.1.x traffic. In the main office, keep the 192.168.10.0/24 and 192.168.97.0/16 destinations for the remotes, so the traffic will be forwarded along to the various remotes...

http://www.rapidrun.com/why-rapidrun/ Check this out separate cables that easily attach to prewired jacks. if they have the end connections you need, no re building cables. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

I would look for the make and model number of the switch. I am unsure how we can help with a part we cannot identify. (You have direct wired the offending port and it works without the switch?) I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

Absolutely. If you never attach it to the internet, it will NOT be seen by anyone on the internet. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

http://www.tek-tips.com/threadminder.cfm?pid=462 or http://www.tek-tips.com/threadminder.cfm?pid=940 may know more I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

You want help with software you did not identify in any way? How would anyone even know if they were an expert? I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

http://www.newegg.com/Product/Product.aspx?Item=N82E16833127493 is as cheap as I see a managed switch, which is what you want. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

http://en.wikipedia.org/wiki/Quality_of_service I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

If the 'modem' (first router) is at 192.168.1.254 and the second router is at 192.168.1.1 then you can't see the 'modem' as the PC thinks you are trying for a local device and never sends the packets to the second router. Since 10.0.0.1 is not in the local subnet, the PC sends packets to the...

1) Your DSL modem (which you did not identify) is a router. If it was just a modem, it would not have an IP Adress. 2) One function of any Gateway router is to protect some small network from some larger network. (usually the internet) They do not usually protect the larger network from your...

It uses them in order they were created, usually this means it favors wired. If you unplug in the middle of a single transfer it will fail, but the next transfer should succeed. If your protocol retries automatically, you may not even know it failed and reconnected. If the wired is on one...

No, I use Linksys/Cisco RV082, RV042, WRV4400N and Netopia 3347g in one VPN. You will want to print the exact settings at each end, as they have to exactly match. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

10 and 100 meg, yes. Gig, no. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

STP is fairly bad unless managed, the algorithm defaults to the Lowest MAC Address being the root of the tree, but the lowest MAC address is almost always the oldest, least capable piece of equipment you own. You want your newest network device to be the root of your network in most instances...

There is no mention of Spanning Tree Protocol in the documentation I found, (User guide or Spec Sheet) but there is something called Broadcast storm Control. I suspect you have demonstrated it. To use multiple ports, you want STP or some sort of Link Aggregation, which is also not mentioned in...

I looked up http://en.wikipedia.org/wiki/International_Air_Transport_Association_airport_code and CHA is Chattanooga, TN. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers

I have two good answers for you: Step 10 is in ATL which is Atlanta, Step 9 (CHA) may be Charleston SC so the names do not hint you are in Switzerland. When I DO traceroute into Europe, (tracrt lavalys.com) I jump by 110 ms crossing the Atlantic by cable. Since it only takes you 30 ms, you...

First idea, use a laptop at each step so you know which leg is borked. The fiber converters I have used can be set to always see link, or to see the link on the copper, choose wisely. Unlike copper fiber runs at only one speed and only one duplex. Nothing can be set to Auto. If some stuff HAS...

First the simple, but slower way. I use RV042s, but my changes actually were out on the spoke, not the hub. Home1 (and all the other Homes) needs to claim subnet 192.168.0.0 with a mask of 255.255.0.0 is at 24.24.24.24 (IP address of SGS Office) now when you ping 192.168.12.1, your PC will...