Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jimbopalmer

    VPN tunnel ports

    Two RV082 behind 2 DSL modems will work, can you configure your DSL routers into 'bridge mode'? I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  2. jimbopalmer

    Sending data across 2 VPNS

    If the remotes see the main office as 192.168.0.0/16 then all 192.168.x.x traffic will go to the main office, not just 192.168.1.x traffic. In the main office, keep the 192.168.10.0/24 and 192.168.97.0/16 destinations for the remotes, so the traffic will be forwarded along to the various remotes...
  3. jimbopalmer

    [Cabeling] VGA Cable + in different room from PCU

    http://www.rapidrun.com/why-rapidrun/ Check this out separate cables that easily attach to prewired jacks. if they have the end connections you need, no re building cables. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  4. jimbopalmer

    Can't see broadcast message on UDP

    I would look for the make and model number of the switch. I am unsure how we can help with a part we cannot identify. (You have direct wired the offending port and it works without the switch?) I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  5. jimbopalmer

    Protecting IP from tracking

    Absolutely. If you never attach it to the internet, it will NOT be seen by anyone on the internet. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  6. jimbopalmer

    What do my PBX need to work with a SIP carrier.

    http://www.tek-tips.com/threadminder.cfm?pid=462 or http://www.tek-tips.com/threadminder.cfm?pid=940 may know more I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  7. jimbopalmer

    MY CCTV Camera

    You want help with software you did not identify in any way? How would anyone even know if they were an expert? I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  8. jimbopalmer

    Home Network Monitoring

    http://www.newegg.com/Product/Product.aspx?Item=N82E16833127493 is as cheap as I see a managed switch, which is what you want. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  9. jimbopalmer

    Voice Paging issues across Sonicwall VPN

    http://en.wikipedia.org/wiki/Quality_of_service I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  10. jimbopalmer

    Linksys E1200 router "Internet" port

    If the 'modem' (first router) is at 192.168.1.254 and the second router is at 192.168.1.1 then you can't see the 'modem' as the PC thinks you are trying for a local device and never sends the packets to the second router. Since 10.0.0.1 is not in the local subnet, the PC sends packets to the...
  11. jimbopalmer

    Linksys E1200 router "Internet" port

    1) Your DSL modem (which you did not identify) is a router. If it was just a modem, it would not have an IP Adress. 2) One function of any Gateway router is to protect some small network from some larger network. (usually the internet) They do not usually protect the larger network from your...
  12. jimbopalmer

    General question -- How does Windows decide whether to use wired or wireless when both are present?

    It uses them in order they were created, usually this means it favors wired. If you unplug in the middle of a single transfer it will fail, but the next transfer should succeed. If your protocol retries automatically, you may not even know it failed and reconnected. If the wired is on one...
  13. jimbopalmer

    Do routers at each end of VPN tunnel need to be the same?

    No, I use Linksys/Cisco RV082, RV042, WRV4400N and Netopia 3347g in one VPN. You will want to print the exact settings at each end, as they have to exactly match. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  14. jimbopalmer

    Can ethernet signal be sent over just two pair?

    10 and 100 meg, yes. Gig, no. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  15. jimbopalmer

    unmanaged switch with mini-gbic and gigabit fiber tranceivers

    STP is fairly bad unless managed, the algorithm defaults to the Lowest MAC Address being the root of the tree, but the lowest MAC address is almost always the oldest, least capable piece of equipment you own. You want your newest network device to be the root of your network in most instances...
  16. jimbopalmer

    unmanaged switch with mini-gbic and gigabit fiber tranceivers

    There is no mention of Spanning Tree Protocol in the documentation I found, (User guide or Spec Sheet) but there is something called Broadcast storm Control. I suspect you have demonstrated it. To use multiple ports, you want STP or some sort of Link Aggregation, which is also not mentioned in...
  17. jimbopalmer

    traceroute question

    I looked up http://en.wikipedia.org/wiki/International_Air_Transport_Association_airport_code and CHA is Chattanooga, TN. I tried to remain child-like, all I achieved was childish. Tsar of all the Rushers
  18. jimbopalmer

    traceroute question

    I have two good answers for you: Step 10 is in ATL which is Atlanta, Step 9 (CHA) may be Charleston SC so the names do not hint you are in Switzerland. When I DO traceroute into Europe, (tracrt lavalys.com) I jump by 110 ms crossing the Atlantic by cable. Since it only takes you 30 ms, you...
  19. jimbopalmer

    Can ethernet travel from fiber to copper back to fiber then back to copper?

    First idea, use a laptop at each step so you know which leg is borked. The fiber converters I have used can be set to always see link, or to see the link on the copper, choose wisely. Unlike copper fiber runs at only one speed and only one duplex. Nothing can be set to Auto. If some stuff HAS...
  20. jimbopalmer

    Symantec SGS420 help.....

    First the simple, but slower way. I use RV042s, but my changes actually were out on the spoke, not the hub. Home1 (and all the other Homes) needs to claim subnet 192.168.0.0 with a mask of 255.255.0.0 is at 24.24.24.24 (IP address of SGS Office) now when you ping 192.168.12.1, your PC will...

Part and Inventory Search

Back
Top