Search results for query: *

Hacked is what I figured. Just suddenly started happening.Most likely coming in through the voice mails UM port. Thanks!

Hello everyone,I have a hospital customer of mine that has a SV9100 with a PRI that recently is getting phantom calls and strange voice mail transfers on the operators phone display (picture below). The problem also happens when she puts the phone in Night mode to ring the nurses station. Thanks...

I'M having an occasional issue with remote phones over a WAN VPN saying SIP Server Not Found. Sometimes doing a hard reset on the phone makes it reconnect sometimes it doesn't. It only does this every couple weeks or so. Thanks for the help.

Thanks belvedere for the info. Would the same CPU II software level be the same for a PRT card?

Hello everyone,we recently adopted a customer that has a IPK II. What version software on the CPU II will support a PRI on the DTI Card? Thanks for the info.

Thanks for the reply.The ADA(2) I have did come with a power supply.

I have and old Pro 1 system that I connected an ADA (2) underneath the Phone.The phone is told to ring in programming but the ADA does not ring the analog set connected to it.It does let me draw dial tone,but will won't ring.Thanks for the help.

Thanks for your help guys!

Ok thanks,but where do I go and tell the phone not to have internal paging thru the speaker of the set?

If your lines do not appear on the keys.You need to add 2 CAP (Call Apperance Keys) to your phone.

The page code is 55.When I get to the site today,I will check Command 200.

What command command is it to take a multi line set out of an internal and all call page group?.....I've tried command 56 with no luck.

When I try to record a main greeting in the UM.I assign the phone where I want to record from.It calls the phone,and when I answer there are no prompts or nothing indicating to record.It's just dead air.Thanks for the help.

When I installed the Polycomm Soundstation on an analog port in the phone system.Whenever I go onhook with the polycom,it won't disconnect the call.Is there a analog timer,etc that needs to changed?...Thanks for the help.

The KeyVoice might not work because is does not know the trailing digits that the 124i sends....Also you might want to look in the programming for the KeyVoice to see if there is an option to select what type phone system you have it connected to..

You might want to contact KeyVoice and see if there is somekind of integration string that needs to be setup in there software...good luck

Thanks for the help Ozzie.

Hello...I need the related commands to setup outbound Caller I.D. to be sent to the carrier for DID extensions...Thanks for the help.

It may say 80112..its a white sticker on the component side..I dont have the card in front me,but if it does not have a letter at the end.Its an old version card..

On the card there is a sticker that says 80211...if it does not have an "A" at the end..its an older version card that doesnt support caller I.D. unless your get the piggyback board for it..If you purchased it from a reseller,I would exchange it if you can for the newer version card...good luck