Search results for query: *

no registration with usernames and password needed with STC sip trunk and IPO. configure the IP route config on IPO. check the sip trunk channel licenses check the SIP trunk status on System Status App. check your network and do a ping task from the IPO System Status app to the STC IP and check...

what is your deployment steps?

https://forums.rockylinux.org/t/disk-swap-issues-in-rocky/14846 try first, remount the sdb and reformate it. then try this link check this.

check the disk boot order from the VM setting. check the port 7071 settings >> additinnal hard drive section >> reformate and remount it. you will need some linux command on the SE to default the boot to be from sda.

send ICR config and PRI line config.

can you check the blacklisted IPs and Extensions from the table in the system status app and remove them if existed?

can you send me the config file privately to check or can connect remote session together.

i think there is mis config in the pri line, but happy to hear that it worked. best of luck.

1- delete this short code from the solution user rights, user rights primary and user rights expansion. 2- create the below short code : on the primary user rights and select the users membership. Code: 8N Feature: Dial Telephone Number: 8N Line Group Id: 99003 3- recreate the below short...

is the short code that users using a system short code/ solution user right short code / primary user right short code ?

try to change the outgoing group ID for the PRI line. to diffrent from the IDs of the analog lines. share screens for all IDs of the 500v2 gateway expansion.

you should delete the system short code/ ARS/user short code/ user rights short code that is using those line's IDs for outgoing calls to stop this alarm.

1- the line on the Primary server must be a " Web Socket Server " line. 2- the line on the secondary server must be a " Web Socket Client " line. 3- both lines should have the same web socket password. 4- both systems primary and secondary should have the same Administrator password. 5- the...

i can see that the websocket password not the same in both lines on primary and secondary! you can confirm! first, make the websoket password in primary webserver line as the same in secondary client line. try to change the security in both lines to " unsecured". make sure that the websocket...

can you share the IP office line configurations on both servers Primary and secondary?

i don't know how to use a call flow for outgoing calls using a short code! and don't know how the IVR tree will be ? please can you explain briefly ?!

I have a question in Avaya VM pro configuration. is there any way to configure the call recording advice for outgoing calls only ? appreciate your help.

thanks guys for your help i have solved the problem and now i can redial with displaying names and prefix + ext. numbers directly without any short codes prefixes.

hi QZ, i tried to apply your recommendation but, not working

thanks, QZ it works fine but, without any names displayed. the display showning the number is dialing from the other site added after s21E is there away to show the name for the dialing user beside the number