Search results for query: *

Indeed, all TDM phones should be updated anyway using the TSDM tool within the V11 Assistant

Not sure what you mean but CP200T/405T - Minimum OS4K Version V8 R2.22.24 includes CP200T and 205T Best is to try out the phone - plug it in and test

CP200T/405T - Minimum OS4K Version V8 R2.22.24

SIP and HFA firmware for phones at https://www.tek-tips.com/forums/965/faqs/7883

The correct forum on here is called Siemens Hicom Here is the link to that forum: https://www.tek-tips.com/forums/siemens-hicom.965/ And the link to the FAQ about software etc. for phones: https://www.tek-tips.com/forums/965/faqs/7883

I don't know much about the OSB but I think that a larger PABX like OpenScape 4000 or OpenScape Voice would do that work easily.

Try your question in the Hicom Forum https://www.tek-tips.com/forums/siemens-hicom.965/

That's normally for trunk groups - Priority is decided in the BUEND AMO and then you assign that priority to a key. But for end users I think that it might need MLPP (Multi Level Precedence and Protection) - you tell the phone in SDAT what it's level is and you set it up in ZAND and ACSU AMO's -...

There should be an NTP Server (Network Time Protocol) on the local area network

OpenScape 4000 V10 Volume 4 IP Solutions Service Documentation Issue 39 Check 2.11.1 General Description The STMIX can be re-flashed in case the board is not booting or not becoming READY in RMX. The process can also be used to factory reset an STMIX board. All customer saved data will be...

Have you used the Assistant to update the loadware and OS of the STMIX ?

Yes, have you tried that ?

"-Is there no solution other than a hot line to send numbers directly to an analog trunk?" It might be worth a try - It may be that the HOTLN will not dial out directly but it will dial an extension so add 99 as a float number and forward it to the desired destination and test

Hi - you should address your request to the specific forum of Hicom300 which is for HiPath - https://www.tek-tips.com/forums/siemens-hicom.965/

Money - some customers have multiple sites (100 or more sites) that's a lot of upgrades and money to upgrade all the sites. They evolve and may move to OSV central platform - it depends - but end users will always require phones and if you can't get OptiSets/OptiPoints then the newer phones...

Yes, for instance you can add OpenStage 15 phones to HiPath 4000 Version 3 - The V3 system was released long before the OpenStage phones So, you have to make them 'backward compatible' to that system by setting the phone to be OptiPoint which the old system understands. Also if you use CP210 on...

Ha - Ok ! - I remember now - ! - sorry about that Here is the procedure for the Non-Display OpenStage 10 Plug in the phone to a working Digital Line 'The operating mode of an OpenStage 10 phone is changed via the 3 function keys. 1. Initially, all 3 LEDs of the function keys are off. Press the...

FAQ https://www.tek-tips.com/forums/965/faqs/7883

OK sorry about that - I was looking at it and seeing V10 - my mistake - good luck with upgrade !

OK - Maybe there is a recommended way But - I would start a new Duplex install and then go to site with the new processor and hard disks Shutdown the existing simplex - install the new processor, cables and hard drives and start up systems. You will need to generate an XML from the existing...