Search results for query: *

Yes for most releases. Which release is your IPO?

It is shame that there is no fallover to embedded voicemail even if it a much less capable product.

Look as 's' in the shortcode Short codes You will need to check with your provider is you can dial out as a different number. Probably OK if you own a block of DDIs.

Thanks for reminding me about Java Curlycord. I just keep a renamed copy of the java.security file then copy as java.security and replace any updates. There's probably a batch file to do this .

Using 60.3.0 with a BCM50 on Windows 11 here. I recall you may need to check the FAQ on Java. Firebird - is there any real difference between 60.3.0 and 62.0.5?

The docs are out there somewhere. It looks as though this added analogue extensions to a Quick Edition set up. I recall this used 4600 series phones with special firmware so no PBX needed for a small set up but not compatible with IP Office?

What does the UPS event log show?

You'd better asking in the wiring closet - CM/Aura forum.

Looking at the help above isn't the Source IP Address, ITSP domain etc, going to be the same for all lines from the ITSP? Tests so far shows that the IPO just reacts to the lowest numbered line and uses that destination.

From the help for R11. SIP Trunk Advanced Association Method: Default = By Source IP address. Software level = 8.0+. This field sets the method by which a SIP line is associated with an incoming SIP request. The search for a line match for an incoming request is done against each line until...

Yes that is a V1 as they did not know there would be a V2. I recall the drive is a half slim SATA DOM 32gb MO-297. Something else might work but there's not much space.

This was the PCN.

Does it save V1 or V2 on the front of the module as V1s were prone to failure. I think Avaya would have swapped at one time. Once I had a quick go at replacing the drive itself but could not seem to get it to work and just built an application server in a VM.

Thanks for checking. Line A running by itself number A, credentials A, no incoming number in ICR to extn 400. Main works OK as only a single number, SIP call details Line Credentials A all set to auto. HG Main has SIP name main Invite with actual numbers hidden 09:28:20 157051962mS SIP...

Thanks Sipmeister! I now have 'real' numbers coming is as +N but adding the to incoming number in the ICR doesn't seem to make any difference. In SIP Line - SIP advanced the options for association method aside from the default source IP look to be for the hostname which will of course be the...

I recall there were at least APT and DPT digital phones - I've not seen a definitive list of what works with what. The PBX manuals only seem to show the current models but earlier and later phones may work.

Panasonic use KX-T for just about anything to do with phones - even the latest consumer phones. According to the manual you need a KX-T30830 display phone for programming although this may not be needed if you just want to run as interested. There may be others but I've never seen a definitive...

I have only ever tested it but here is the EOS notice Not that it affects me but I saw an earlier announcement Effective 14 October 2024, Spaces will no longer be compliant with US HIPAA or Payment Card Industry-Data Security Standards. In addition to no longer using Spaces for any purposes...

I have a series of numbers each with separate accounts from same provider which need to go to separate destinations - but all calls go to the first ICR based on their IP address. I did try called number on the ICR but I note that all my numbers are followed by the same letters so the default...

I've just the list of current phones and J129s are listed. As an aside I note no digital phones ...