Search results for query: *

It got 3.7 at the moment, but I can't access it and I want to backup the key codes and install completly new system if that posibble. Regards,

Hello, I am looking for some help in retriving the key codes from my BCM400 and installing a new OS system. I was thinking to connect a new hard drive and install the new system on it then apply the key codes (I'll keep the old one in case anything went wrong). I am not sure also where I can...

I am including some of the System Event Log, it seems that there is an issue with the network driver! not really sure. System Event Log: ----------------- INFORMATION, 04/10/2008, 06:02:53AM, NGRPCI, 0, 5, Can't find or load message DLL. Message DLL must be in path or in current directory...

I can't remove it as it dosn't accept a null value when connected via serial. I am assuming that there is a problem in the apache, that is why the web interface doesn't work.. any suggestions on how to check it? Also do you think I can reset the firewall setting via the command line or by...

The lan settilng on the bcm are as follow: Lan1: 192.168.0.10 Subnet mask: 255.255.255.0 Lan2: 10.10.11.1 Subnet Mask: 255.255.255.0 Next Hub: 192.168.0.1 DNS 192.168.0.1 Domain Name: I-BCM My PC Setting: 192.168.0.8 255.255.255.0 I can ping my pc from the BCM command line when connected...

Thanks for the replies, I have connect via the internal modem and was able to ping the ip 10.10.14.1, howeever when I put that on internet explorer it doesnt open anything.. any ideas? Cheers

Deweyhumbolt: Could you explain how to connect to the BCM via the internal modem if possible please. acewarlock: I am not sure mate, cant we access the firewall setting via the serial cable? or even reset it up? Regards

Hello guys, I have managed to connect via the serial cable.. all IP's are fine. I can even ping my PC from the BCM however I still not able to ping the BCM from my PC... I am not sure what is the problem, I am thinking that it might be a firewall issue!! however I cant change firewall rules or...

Thank you guys for the replies. Deweyhumbolt: How would I do that please.. I am not really sure. acewarlock: I think I had them right.. is there anyway to check them without loging into the BCM? regards,

It seems like all the experts are from US and everyone is sleeping. Thanks for everyones reply however we still have the problem. any ideas, suggestions?

Yes I did some changes on the lan seetings and cable were connected, I've just rebooted the system with network cables disconnected, reconnected them once all the lights were solid but still can't ping. Cheers

Thanks guys for your replies, I was able to log into the system last week, I was working on the voice over IP (trying to get it to work).. Yesterday I tried to connect and it didn't connect, I can't even ping the ip. I have Lan1 on the Local network range: 192.168.0.10 Lan2 I've...

hi i have been spending hours on the net searching for solution and this forum seems to have the most useful information and experienced people. basically, my bcm400 system is not working properly. telephone system works however we cannot access the bcm system either from network or straight...