Search results for query: *

I have checked all rollers it wasn't really smooth nor bolded...

as i said before, there is NO jams everytime I receive that message so I wan wandering if replacing PIU will solve the problem

got this error message frequently at roughly every 30pgs or less and sometimes appx at 100pgs and when it happens you noticed that there is no physical jam located anywhere at the right hand cover. I checked the sensor and tested good, printed from all trays looks like it jams from all possible...

ArcView GIS 3.2a only happening to 5500A plooter tested with 5000plotter its ok

Print quality issue where client tries to plot "specific geographical map" and everytime he does so instead of printing pink it prints faded red and you still can see the pink kindda been half overshadowed by red on the same spot. There are other colors on this map, ofcousre and those are OK...

I have checked biasing contact it was ok and right door was properly closed, i might try replacing developer to see if it is the defective one that causing this issue...not sure

After replaced yellow developer, although it printed fine for few days, alternating messages between "replace yellow toner cartridge," and "printing 1of1 pages" shows when open/closes the front door. I tried replacing yellow toner cartridge, reseatted yellow developer just to ensure I have...

I had the exact same problem and yes, I would agree with the rest that replacing developer will fix the issue. However, speaking of yellow, you gotta be carefull how u install that yellow developer or else u will receive replace yellow toner cartridge message even though it is brand new...and im...