Search results for query: *

Thank you for the warning and explanation. It is making much more sense now. Key 11 which is one I changed would have been a line key, so there should be no adverse effects. Key 9 may have been a MUTE key on some phones. If I do a DIS-TAPRO:STN; as suggested above and sort all of the key...

5045 | 63 | OPTISET | | | | | | | 5071 | 63 | OPTISET | 1 MB 2 MBLINE | | | | | 7 DND 10...

Let me make sure I understand, I used cha-tapro to add line keys to a specific station. It asks what key layout is being used. I entered 63, and then went through the keynos and edited that specific station. After I said 9-12 were LINE layout, I then used add-kcsu to add the appropriate...

Got it :) Thank you for the Tapro hint :) Nick

Yes, I am trying to add 4935 as a line key on kyno 10. I am currently unable to add key layouts through the gui until we can get a service call placed; in the meantime I am braving expert mode. :]. So amo tapro is where I actually can define different line keys on standard layouts. Currently...

Any pointers on this message: CHA-KCSU:5135,SEC,10,4935,YES,NO,DI,NO,,,SLKNAME; H500: AMO KCSU STARTED F22: KYNO 10 IS NOT ASSIGNED TO A STNOSEC. 4935 is the primary line for my coworker. Thanks Nick

Does anyone know how to change the line keys for a station on an optipoint 500? For example I have a rollover line that goes to 2135. I would like to make that a line key that points to 5252. If anyone has any guidance, it would be appreciated. Nick

Kevin906, I finally got approval to EXE-REST:UNIT,A1,RELOAD;. I was able to sync all of the databases. Thank you VERY MUCH! Nick

Thanks for the tip donb01. I'll see if telco has it forwarded next. Nick

Currently, I have some physican offices that had numbers that existed before the installation of our Hipath phone system; such as XXX-7376, which gets forwarded to 5480 which is a DID on the Hipath. Where can I find where this is located in expert mode? Best Regards, Nick

Are we talking about a hard restart of the A1 card? Do you have the expert mode command handy to do this. I will have to schedule this after hours if it will take the switching unit down. Thanks, Nick

Thank you for your asssistance. I still cannot get the HIM data synchronized. However, do you know what the HIM data is, exactly? Best Regards, Nick

Go to Configuration Management -> Network -> System Yes, the only thing that will not synchronize is the HIM data. So is expert mode as follows the next step? "You could also go into expert mode and do EXE-UPDAT:BP,ALL; I believe is the command. Do it twice. I don't know if there is still an...

Upload Status : Upload Required Unixware was reloaded on this Hipath recently. I am now receiving HIM Data: Upload Required Any resolution without resorting to reloading the OS again? Best Regards, Nick

Thank you again SBCSU. Your help is priceless. Nick

The ip address of the CDR machine is 192.0.2.55. I haven't changed it. It appeared to stop working about 1:00 am last night. Best Regards, Nick

My psychotic Hipath 4K has decided to drop the 192 in front of the 0.0.2.55? Does anyone know the command to change it back to 192.0.2.55 from expert mode? Best Regards, Nick DISPLAY COMPLETED; <dis-lssm; DIS-LSSM; H500: AMO LSSM STARTED...

Thank you for your help. We have all the alarm lights out on the system. I can make changes from expert mode to the individual phones, but the java interface refuses to let me edit the phone layout. A keytest simulation will show all the buttons on the phone and let me dial from the gui. We...

DIS-LSSM; H500: AMO LSSM STARTED +=========================================================================+ | STATE OF LAN - CHANNELS | +=========================================================================+ | |...

CDR: CDB POOL FULL - LOSS OF DATA IN SWU" F4684 M4 N3519 NO ACT BPB CDR MAINTENANCE 13-07-17 06:32:53 Our call logger had stopped last time maintenance was performed. Thank you for pointing me in the right direction. I am still receiving the above message. Is there anyway to increase this...