Search results for query: *

Works fine. I executed plan B after frying the mobo. Fortunately I did not fry the video card.

you can still get the all in wonder in AGP format with tons of ins and outs. The thing to be careful with when using AGP is have alot of ram. Too much ram can cause memory conflicts when using older ATI agp cards. I have one and it works fine with 512 megs. The all in wonder 9600 agp all in...

HD's and optic drive installed properly. When installing, I get to the partition screen at which point I partition one of the HD's. I go to install win xp on the C partition but get the following message: "To install win xp on the partition you selected, setup must write some startup files...

I think you have either a corrupted BIOS upgrade or an incompatible BIOS upgrade. Try upgrading the BIOS.

Must one reinstall BIOS after jumper flashing the bios?

I dont think this is a bios problem, but I could be wrong. I think this is a whiring prob. you should check the the wiring harness for the hdd access light, power light, power button etc to macke sure they are connected to the proper header on the mobo. You'll have to get a copy of the mobo...

I think the card is 5X if memory serves. bios only has 4X & 8X settings, and i have it set to 4x. Now I'm having another problem: I disabled the monitor driver and monitor loses signal at boot up. I see windows logo, then "no signal." bios works ok, safe mode, here i come....

Phardon me !! found this excellent cite on interleave options. the only thing is that it doesn't explain 8-way interleave. http://arstechnica.com/guides/tweaks/bios.ars

Also, check the apeture size for the new graphics card. 9800 pro card had min of 128, so, when you disconnect from vga cable from card and reconnect to mobo vga connection, you may need to reset the apeture to it's lowest setting until you get a new card.

I have a 9800 pro also having trouble getting drivers installed on xp pro 32. I thought I could disable windows 9800 drivers, but that does not seem to work after installing ati drivers but that does not work.

Also, more RAM on the card is better

ati agp all in wonder 9800 pro is the graphics card. resetting the apeture (in bios) to 128 fixed the problem, but now the monitor does not show the edges of the desktop so that I can see only the top edge of the start button. Also, res is set at lowest (4xx X 6xx) and increasing makes icons...

I'm losing video signal at about 2/3 of way through XP install. BIOS set to AGP, apeture was set to 32, then 64, when setting to 128 viola, xoxoxoxo

manual?? recommend???? bbbwwwwaaaaaaaaahahahhahaha can you read chinese?

Did you use thermal grease when you installed the fan on the cpu? it not, the cpu may be overheating triggering the auto shutoff to avoid overheating.

oops, two modules

Do I want a 2, 4 or 8 Way DRAM Bank interleave in the bios? 1066 fsb mobo, 1066 processer, crucial ballistix ddr2 5300 (667). http://www.crucial.com/ballistix/store/PartSpecs.asp?imodule=BL2KIT12864AL663&cat=

WoooHoooo, problem solved: hd's jumpered properly, it was the cd/dvd that was jumpered as master while attached on the ide cable as slave. BenQ 1670 optical ~

update: hd is jumpered as cable select enabled. Maxtor quickview pata 133 drive. jumper schematic on the device has a dedicated slave setting (hd as master). jumper schematic online indicates a CLJ setting. what is a CLJ setting?

connections are correct as hd master and cd/dvd slave (hd on end, cd/dvd on middle); could be jumpers, but the *%$&@!^ verbiage with the product (+ the online documentation) is vague and reads duplicitously.