Search results for query: *

Fyi I have an ars setup so if I dial 9 and the extension It will work, is there a way to make this work without the 9? In my dialplan when I try to assign a ars to a fiels I get feature not assigned. Uggg

I would like to insert a string of digits when my people call out. I have a new building starting up and it uses a simular did range. I would like for my people to be able to dial the last 4 digits and have my pbx insert the first three for this range only. Example Building one has DID range...

We just switched over to a PRI and we are now getting incomming caller ID numbers. I was wondering is there a way to get the names sent with caller id as well? I have definity version 7

just a though, try crossing the fiber pairs on the allied telesyn. Ive had to do this on a set of 10 mb hubs. I guess like a cross over...

Keep in mind many believe this opened up your switch to toll fraud. Supposidly there are way people can get to a second dial tone and make all sorts of call out of your system.

Thanks for the tips every one. I went with the bottom up, laced everything then punched everything down from the top down... just seemed easier. I found a good internet site that spelled out all the color codes, and once I studied that It was very easy. Once you understand that tip is...

Yah I have mapped out my whole routing table, but there are things that really confuse me. For instance... I have two trunks Number 2 and Number 3. # 2 is a PRI for local calls # 3 is a T1 for long distance. Forget FRL and COR basically as I see it every one has access to every number...

I think this is just a big money maker for Avaya. Imagine if Avaya sold automobiles, they would sell you a key that would open the door, open the trunk, open the gas tank, even start the car, but they would put a lock on the hood and not allow you into the engine compartment. For instance, we...

My ARS table is a mess can any one give me a basic clean table as a guide?

Laugh... looks like you responded just as I typed my message. Thanks that worked like a charm.

Found it.. On page 3 of the PRI trunk, there was a way to handle incomming calls... Since I have 4 digit extensions and they are sending me 3 digits, I inserted my first digit.

We have just installed a New ISDN PRI trunk in a Difinity G3 V7. I can make out going calls on this trunk fine. When I try to call the trunk number, I get a "Were sorry you call can not be completed as dialed" message. I was told this PRI is sending us 3 digits. I do not have any...

Does any one have any tips on punching down 200 pair cat 3 on type 66 blocks? I know the color codes, Im looking for tips to speed it up? This is going to be tedious...

I have a solution for you that would be perfect, upgrade the people that are calling out with a modem to Digital lines, the first time they plug in their modem, blam 48 v dc. I dont have a clue what the Digital boards go for of the phone sets for that matter, but if you already have digital...

Does any one know a good way to redo the routing table? My table is carried over from 10 years and it is a mess. Is there a utility that will generate a defauly or standard table to start over with? Also is there a listing of good number to block, I know I should block 900 and 976 and limit...