Search results for query: *

PoE is not the issue. When this all started we hought about the PoE allocation also. What we have done is disabled PoE on all the switch ports and put bricks at every location. Seems to be a fix that really was not the issue. The reboots have continued.

I have a Toshiba system that is acting very strangely. When we unplug and plug back an IP5122 telephone into the switch all the phones on the IPU card where that phone resides reboot. I am an dedicated Avaya person and would be able to find this easily if it was on a CLAN. But the Toshiba is...

I have a Toshiba system that is acting very strangely. When we unplug and plug back an IP5122 telephone into the switch all the phones on the IPU card where that phone resides reboot. I am an dedicated Avaya person and would be able to find this easily if it was on a CLAN. But the Toshiba is...

I have a Toshiba system that is acting very strangely. When we unplug and plug back an IP5122 telephone into the switch all the phones on the IPU card where that phone resides reboot. I am an dedicated Avaya person and would be able to find this easily if it was on a CLAN. But the Toshiba is...

You can use Avaya Site Management Software using your ip address. Or you may be able to use hyperterminal

Your voicemail is determined by hours of storage, not by number of mailboxes. You can check this by going to: Customer Services/Administration System Verification Verify System Status This will give you purchased hours and purchased ports. Also, go under the...

Do you have audix set as the message center in the hunt group for voicemail?

Here is the solution we came up with. x4600 is the number now pointing to the attendant as a LDN. We move that to a virtual extension with coverage to the attd. We set the cover path with the attd to termin to coverage points with bridged app. to y. We also put bridged app. on x4610 for...

Is there a way to have an incoming call ring at the attendant and at an extension at the same time?

Manipulate your digits on the inc-call-handling treatment screen. You can delete up to 12 there

On the TN circuit boards there is a dip switch on the board that needs to be set. The default setting is for T1 here in the states. If you are setting up E1 that switch needs to be flipped. On a MM710 board I am unsure about a dip switch. But I can find out. Maybe someone on this board can...

Your set up shows a bit rate of 1.544. Your question said you were setting up E1. That bit rate should be set to 2.048. This will require a dip switch setting on you circuit card

Your question seems a little confusing. Can you clarify. Is this an inbound number? Are you talking about it's DNIS?

The problem phone is currently running the latest firmware. The phones that we have that work fine are running R2.8 We suspect there may be an issue the 2.9 firmware. We have Avaya tier 3 now looking at it.

What we want the phone to do, and we have this working other locations, is to be able to have a user move their phone to a new location without having to know the passwcode for logging it in and out.

Sorry - not VLAN 1 - Network Region 1.

We have a location that is having problems moving IP phones from one location to another. The resolution is that they have to log out the phone and then log it back in after moving. We have other location where we do not have to perform this. When the phone is moved (without logging it out)...

I think the issue of the modem going may be closer to the mark. I dial into so many systems and it is happening to all of them. I also have tried rebooting. That did not solve my issue. I worked beautiful until we have done a recent upgraded to our Definty system that I am off of.

I have a setup with a bridged appearance with my modem extension on my telephone. I used to be able to place a call and have the user on the legend system transfer me to *10. I would then hit the connect on the SPM and was able to connect. Now it is acting like the modems are not handshaking...

How do I increase the number of sessions allowed in an Intuity AUDIX? I am now limited to two. Is this something I can change?