Search results for query: *

Ok thanks tests on going I have found a pn on CM6 when you change ds1 settings chare are saved but not applied. you need to remove the ds1 and setup at the first attemps correct settings for apply these settings.. no so easy during tests thanks Avaya

settings for DS1 on G3R : DS1 CIRCUIT PACK Location: 01D20 Name: tie Bit Rate: 2.048 Line Coding: hdb3 Signaling Mode: isdn-pri Connect: host CentreVu Long Timers? n...

Hi, I would like to setup a lonk using DS1 boards between G3Rv9 and à R016x.00.1.510.1 on the g3r QSIG feature is not available. then I would like to build a private line. trunk looks like this: Group Number: 21 Group Type: isdn CDR Reports: y Group Name...

check tenant of trunk and also vdn these tenant must providfe right for play music source, I have made some test few months ago and saw that music is linked to VDN

You have all the time this type of message. This message appear when for example the call is drop because the user is busy or this is a wrong number. If you wan't could you post some details about the value this abdormal events:see this sample: Event type Event description Event Data 1...

Hi all, I have connected and IVR(Envox) and a Definity (R11). This IVR and our siwtch was connected by ISDN link. The Pb is the call tranfert: Pbx receivec call transfert to IVR IVR works and re-route call to PBX. In our case two channels are used for make this! because Tromboning can be...

Check with status remote for know if your remote is enable

you can used 2 vdn and 2 vector first step : vdn 1 vector 1 1 goto step 6 if expected-wait for skill xx pri m > yy 2 queue to skill xx pri m 3 annoucement xxx1 4 wait time 5 sec hearing music 5 goto step 3 6 route vdn 2 second step vdn 2 vector 2 1 queue to skill xx h 2 annoucement xxx1 3 wait...

I make somes test, I read doc, and now i know: sample: you have to vdn managed by to vectors in first vdn in the vector you have collect digits for check a choice if no choice you route by default to the sencond vdn and the second vector. If after the step route to if no digits collect the...

Don't forget in remote access to enter barrier code. In this moment a lot of remote access have pb with Hackers. sometimes used this command: monitor security-violations remote-access

Hi, I have this type of events: 31 Dial-ahead discarded 201/4 331C 11/14/10:01 11/14/10:01 1 I know the pb is in vector 201 step 4 but could expalin the type of my pb associated to this annoucement